Hello
Driver list for 2012 R2
* RECOMMENDED * Intel(R) Chipset (C236) Driver for HPE ProLiant ML10 Gen9 Servers and Microsoft Windows Server 2012 R2
* RECOMMENDED * Intel(R) Rapid Storage Technology Driver for HPE ProLiant ML10 Gen9 Servers and Microsoft Windows Server 2012 R2
* RECOMMENDED * Intel(R) Management Engine Interface Driver for HPE ProLiant ML10 Gen9 Servers and Microsoft Windows Server 2012 R2
* RECOMMENDED * Intel(R) Graphic Driver for HPE ProLiant ML10 Gen9 Servers and Microsoft Windows Server 2012 R2
* RECOMMENDED * Intel(R) I219-LM 1Gb NIC Driver for HPE ProLiant ML10 Gen9 Servers and Microsoft Windows Server 2012 R2
Step by step os installation;
1. Enter server BIOS using DEL/ESC key.
2. Choose Save and exit menu
3. Choose restore default option and use F4 to save and exit.
4. Reboot the server and enter server BIOS
5. Now select Advanced menu
6. Select SATA configuration
7. Select SATA mode selection and set to RAID mode (AHCI mode would be default)
8. Go back to Advanced menu and select CSM configuration
9. Change CSM support to enable and boot option filter to Legacy only (Boot mode set to Legacy)
10. Use F4 to save and exit.
11. Reboot the server and enter into Intel rapid storage technology setup utility using CTRL+I option when prompted.
12. The hard drives detected by the controller would be listed in the page and use (option 1) Create Raid volume