Hello Matti, I have an ML350 G3 with the smart array Raid Controller. I have RAID 0 set on two SCSI disks and the disks check OK when Smart Array checks them. I installed a SATA controller to add new HDDs and DVD drive, and since I did that the Smart Array will not boot the Linux OS. I am getting a GRUB promt line. Which indicates a faulty system usually... Any thoughts on why I would be getting this? Also I do not get promted to enter BIOS at any point unless I remove the Smart Array controller and move it to a different slot. Anything you can suggest would be a great help.
↧
