Hi,
Does the web page time out? If YES, see this document.
You may also try to Reset iLO. It will reset any existing connections to iLO, you may need to reconfigure iLO with its IP address.
Resetting iLO to the factory default settings by using iLO RBSU
1. Restart or power on the server.
2. Press F8 when prompted during POST.
iLO RBSU starts.
3. Select File→Set Defaults.
iLO RBSU prompts you to confirm the request.
4. Press F10 to continue.
iLO RBSU displays the following message:
After setting to factory defaults, iLO 3 will be reset and this utility will exit.
5. Press Enter.
iLO resets and the server boot process finishes.
Thank You!
I am a HP employee.
