Hello,
I am having problems with two DL380 G4 server that are experiencing the same issue - no POST.
One of them was recently turned off for a UPS maintenance and at power on it experienced the issue. I get no video and no POST beep codes. The fans are working and the hard drives are spinning up. I tried the following:
- re-seating RAM modules
- replacing RAM modules
- swapping the CPUs
- swapping power supplies
- removing an extra ethernet card from the pci riser cage
- resetting the nvram cache
- connecting to ilo (no connection)
All the troubleshooting was done on another monitor, so KVM issues are excluded. I also checked the STATUS LEDs and the error code is 41h.
I hadn't checked the other one as thoroughly but the symptoms are the same.