Re: HPE DL320e Gen8 server Win2016 and intelligent provisioning install fails
Hi Martin, Please verify the intelligent Provisioning version on the server, as the version 1.64 added support for Microsoft Windows Server 2016. If the IP version is later than this, you can skip the...
View ArticleRe: DL 325 Gen10 - descativate RAID Mode mixte
Hi,The Gen10 Smart Array Controllers operate in Mixed Mode which combines RAID and HBA operations simultaneously. There is no option to either enable to disable mixed mode.While installing the Windows...
View ArticleRe: Server hidden hard disk viewing and detection
Hello younger bro,As you said, there are two hard drives in each server. It is possible that the hard drives are configured in RAID 1 mode which will reflect as single drive to the operating system.You...
View ArticleRe: Import-HPEiLOCertificate ERROR without details
Hi,Please raise a support ticket with HPE, Looks like this need an investigation.Cheers. I work for HPE.
View ArticleRe: ML30 Gen9 - Power Supply
Ok, good. Is it the same with the Ml30 Gen10? Are the Partnumbers here different?
View ArticleRe: Import-HPEiLOCertificate ERROR without details
Hi,I have few questions based on your script command you posted.1) Why are you using -OutputType RawResponse ? If its for troubleshooting then fine otherwise don't use as it will not hit the iLO server...
View ArticleRaid 1 on dl 580 G10 to installing OS
hello ;We have some DL 580 G10 , I RAID 1 (bay 1 & bay 2) , all server have same RAID configuration .Perviously I use one of HDD which OS Installed and boot with single HDD in new server , when...
View ArticleRe: Ubuntu 16.04
Hello,Please share the complete detail of the server ( it is ML110 Gen9 or Gen10) As well as share the SA controller name (i.e. S100i or any other smart array controller ) for fix the...
View ArticleClik here to view.
DL360 gen10 and controller boot order
Hello!I run DL360 Gen 10 server with Smart Array E208i-a, which I use as boot device,I use legacy boot mode.Now I need to add external jbod to it, so I bought P408E-P.I can install it, it can create...
View ArticleBMC on ProLiant ML110 G6
Hello folks, I appreciate this box is a little old now but I have a questioin about the Lights-Out 100 BMC installed on it. My experience with other servers is the ilo/management GUI usually includes...
View ArticleRe: HPE ML10 GEN 9 SERVER
https://support.hpe.com/hpsc/doc/public/display?sp4ts.oid=32615&docId=mmr_sf-EN_US000006834&lang=en-us&cc=us
View ArticleDL380p G8 P420i - Hard Drive Limitations (10TB HGST drives not working)
I've been doing a fair bit of reading on the matter but have hit a few road blocks on the way. To summarize what I'm working with:*Out of warranty DL380p G8 LFF (12 Bay) with P420i 512mb cache.*6 x...
View ArticleRe: HP DL180G6 and NC523 SFP 10GB Card
Hi Andreas,I've exactly the same problem. Can you please describe better what you did to solve the problem? (Also post download links if necessary)Thank you very much!Regardsuschti
View ArticleMemory configuration error on DL580 G7
Just installed memory cartridge with 4 DIMMS. I installed the DIMMS as recommended (1A and 8A, 2C and 7C) so on. When I boot up I don't see any display. My ilo shows "Maintenance note: Memory...
View ArticleRe: Memory configuration error on DL580 G7
Hello Rjsivarama,Please provide us some additional information such as:How many CPUs are currently installed?Which is the memory size that you aim to reach after the memory upgrade?Provide the memory...
View ArticleRe: ML30 Gen9 - Power Supply
Hi rz2, Part numbers for the ML30 Gen10 are different as 460W PSU are not available for this model. This server uses more efficient 500W PSU. Please refer to the ML30 Gen10 Quickspecs below....
View ArticleRe: error after upgrade to intel e3 1280v6 to gen9 dl20
Hi ,I would like to know ,did you purchased this processor from HPE.If yes so please call HPE tech support with latest AHS logs.Based on the latest AHS HPE tech support will share further...
View ArticleRe: HP Gen10 Servers -System Management Homepage??
Refer the advisory https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00022827en_us HPE has stopped supporting Agent based Monitoring for Gen10 Servers i.e. No SMH or Insight Management...
View Article