Re: HP System Management Homepage v7.3.1.4
Well - it doesn't list a 'data source' - make sure SNMP is setup properly maybe? Be sure to include 'localhost' (127.0.0.1) in there as well. I know you can also use WBEM, but I'm not exeperienced...
View ArticleRe: ML310 G5 Raid1 Drive Replace
I'm not completely sure but don't think they are hot swappable. How can I tell? There are no LED lights on the individual drive bays so assume they are not. Also, whether they are or are not how...
View ArticleProliant DL980 G7 has 1TB RAM, but Xen Server 6.2 only recognizes 256GB of RAM
Hello, we have a problem using the VM server Xen version 6.2 in the Proliant DL980 G7, it has 1TB RAM, but Xen Server 6.2 only recognizes 256GB of RAM ... Other versions like Xen 6.0 and 6.1 recognizes...
View ArticleRe: DL380 G5 Internal Health Light Flash
could you check that power supplies are not mal-functioning, and that fans are ok?and update us with the results?
View ArticleRe: Intelligent Provisioning 1.60 breaks 2008 R2 install (will not accept...
From the Intelligent Provisioning 1.60 Release Notes: Windows-specific issues • The Volume License installation does not complete when you use the Recommended installationmethod to install Windows 2008...
View ArticleRe: Intelligent Provisioning 1.60 breaks 2008 R2 install (will not accept...
I guess it pays to fully read the release notes then and not just skim them. I'm not quite sure why they would replace the setup.exe though.dcc
View ArticleVersion Control Repository
Is the VCR no longer supported? I noticed that when updating the repository (i'm on latest version), the newest service pack it downloads is 2013.09.0B, but there is a 2014.02.0 available. It won't...
View ArticleProliant ml350 g4
I have a Proliant ML350 Gen 4 that had a HD failure. I replaced the drive and the array reuilt itself but it will not boot to Windows Server 2003. It has a PXE error and continues to reboot itself. I...
View ArticleRe: Matrox G200eH Video Controller Driver for Windows Server 2012 X64
Suche nach dem Treiber cp018072.exe das ist der Matrox 2012R2-Treiber...
View ArticleRe: DL380 G5 both power supplies led off
I've seen this sometimes when i change the cache battery: I plug off the both mains connectors, exchange the cache battery, plug in both mains connectors and then: No power anymore. Solution was then:...
View ArticleDL560 GEN8 and vmWare
Hi, How can I establish 100% for sure prior to procuring that the following h/w configuration of a DL560 GEN8 will all be compatible with vmWare vSphere ESXi 5.5 without any suprises come install time...
View ArticleRe: Intelligent Provisioning wants Autounattend.xml, retaining settings
I ran the latest version of Intelligent provisioning and ran into the same problem.I have installed Windows 2008R2 SP1 before and it worked fine running Intelligent Provisioning on ver 1.60.
View ArticleRe: Proliant DL 360 G5 & last version of Homepage (7.3.0.9)
It seems that PHP 5.5.2 added from HP SMH version 7.3.0.9 is not supported on Windows Server 2003 OS. see link bellow... http://www.php.net/manual/en/migration55.incompatible.php
View ArticleRe: bnx2: firmware not running aborting
I run in the same problem when running the HP Smart Update DVD (2014.02) with a HP ProLiantDL380 G5 via iLO virtual media. When doing the reboot after the successful update the Systemhangs and need a...
View ArticleDL180 G6 troubleshooting PSU fan speed
Hi, I need some help !! On DL180 G6 server with 2X PSU, PSU's fan run at very high value on power on start ... and stay at the same level on normal process running. To return to normal run PSU's fan...
View ArticleRe: DL560 GEN8 and vmWare
Hello Tiaan, As per HP's documentation, in the support Matrix shows 5.5 is compatible with the server with som esceptions:...
View ArticleRe: HP DL585 G7 thermal sensor cable and UID cable part numbers?
Hello, I just checked in a server an seems to have these numbers but I did'nt find them in HP's Part Surfer so probably are not ordenable g) Cable assembly, thermal sensor - 583377-001h) Cable...
View ArticleTracking down original configs for old servers
Is there some reference point online here where I can punch in a serial number of an old server (in my case, I have 8 old ProLiant AMD-based servers) and get the original config? I know another...
View ArticleRe: Tracking down original configs for old servers
Partsurfer will generally give you a rundown on what is in a system http://partsurfer.hp.com/ Put the serial number in the search box. Another option is to google the produt-id (part number) That will...
View ArticleDelete an Array without data loss
Hi!I've a Proliant DL380 G5 server with two 73GB SAS disks in RAID1 array.The server is a VMware ESXi 5.1 serverThe question is: is possible to delete the array without loose data stored: OS, VMs,...
View Article