Proliant DL385 G5p and smart array controller P222
Hy, please i wanted an information: I have a Proliant DL 385 G5p and i have seen in hp website, controller P222 may be installed in Proliant GEN 8 and not in generation G5/G6 ETC... Why, If I have...
View ArticleExpanding an array without data loss in an (old) ML350 G3 with a Smart Array...
I have an old ML350 G3 server with a Smart Array 5300 controller. I want to expand an array in RAID5 with one more disk (of same size of others in array), but ACU (boot from SmartStart CD) does not...
View ArticleRe: Remote Insight interface error. .1.3.6.1.4.1.232.0.9006 interface error
I'm using CHIF 3.7 and iLO3 FW 1.55 Haven't had a reoccurrence of 9006 issue so far.
View ArticleRe: Expanding an array without data loss in an (old) ML350 G3 with a Smart...
Hi, As with most hardware arrays, higher level options ie. expanding arrays / switching from one raid level to another requires a functioning battery to be present. HTH Cheers Leon
View ArticleRe: Installing Insight Management Agents on DL380 G4 with 2008 R2
Excelente aporte... resuelto
View ArticleRe: ML150 G6 - New P410 controller not detecting SATA HD's during boot
The two cables look "identical". Put the correct cable in BINGO, P410 now sees the SATA drives fine.
View ArticleRe: Proliant DL385 G5p and smart array controller P222
>the controller works correctly? Works "correctly" is different than tested and supported.Where is the URL you checked?
View ArticleRe: hp dl380 gen8 os support--urgent
Windows Server 2000 is not certified for DL380 Gen8, and there's no driver stack made available.As a workaround, though, you can use VMWare ESXi as an underlying hypervisor and run Windows Server 2000...
View ArticleRe: hp dl380 gen8 os support--urgent
thanks for the info!!!! could you please suggest which hardware i can go for if i need OS as win2000 or if you have any link or list of h/w for which win2000 is certified? Will DL784 will work? Thanks...
View ArticleRe: hp dl380 gen8 os support--urgent
HP doesn't certify any current available hardware with Windows 2000 as a baremetal OS. Hasn't been supported since G5 for most servers.Here are some of the servers and the newest generations thereof...
View ArticleRe: hp dl380 gen8 os support--urgent
so you mean i can still go for DL380 G5 and DL385 G1. it would be highly appreciablev if any link or doc that you can share stating same.. ThanksAbhishekJ
View ArticleRe: hp dl380 gen8 os support--urgent
Windows Server 2000 compatibility matrix:http://h71028.www7.hp.com/enterprise/cache/583791-0-0-0-121.html?404m=cache-ccto0 And, HP does not sell any of these older generation servers as new currently....
View ArticleRe: Windows Server 2012 setup on a 6TB RAID 5 Partition?
Hi Peter. The psysical Controller and controller settings do not have a bearing on what windows can see in this case. Using MBR, the maximum usable partition size is 2TB per physical disk, no matter...
View ArticleML350 Server Won't boot to OS
Hi and thanks to everyone that can help me with this issue. The system is an ML350 with Smart Array E200i. I have run the ACU and got error codes: 720 - Smart Array E200i in Embedded Slot has an...
View ArticleRe: Proliant DL385 G5p and smart array controller P222
Yes works correctly. I the link driver and software, server,dl385g5p, there is not driver and software for P222 but only P212, P410i etc... And in the link product, smart array conroller P222/256,...
View ArticleRe: Proliant DL385 G5p and smart array controller P222
Excuse me i adding also there is not firmware, under driver and software, server, dl385g5p.
View ArticleRe: ML350 Server Won't boot to OS
It also seems as the array has disappeared. The HP ACU shows 3 unassigned drives. I don't want to create an array in case it destroys data. Can the array be recreated with the drives that are installed...
View ArticleRe: ML350 Server Won't boot to OS
Hi, A flat battery on a RAID controller does not stop the array from functioning.If the battery fails the server keeps running but a lot slower since the card disables its write cache. The cache for...
View ArticleHP ML110 G4 IPMI
Hi, How can I access the IPMI interface in the HP ML110 G4 server? I can't find how to view the snsor data. Please help! There is no ingisht manager in the drivers section either.
View ArticleRe: ML350 Server Won't boot to OS
I have removed and replaced the battery. No change, the system reports non system drive and doesn't boot.
View Article