Re: HP Proliant DL380 G5 NIC's not found after firmware update
Hello, at least it seems I was able to figure this issue out, based on Saturas's information. Here the steps I made: 1. Download all necessary tools- download FreeDOS...
View ArticleRe: DL360 Gen 8 P420i/zm
Lansley2000 wrote:Would the 512Mb do the job?661069-B21Thanks againyes
View ArticleRe: HP Proliant DL380 G5 NIC's not found after firmware update
Looks like the NIC's are back up and running. Thanks for all the help from everyone.
View ArticleRe: HP SUM "Failed to add baseline" No default baseline found.
I got around this by downloading the full (not just Windows) ISO and copying the contents to a temp folder on my HDD. I then went to the baseline library and browsed for the swpackages folder (in my...
View ArticleMemory compatibility between servers
I am upgrading the memory in our DL380 G7's. Current memory is: 500662-B21 - HP 8GB (1x8GB) Dual Rank x4 PC-310600 (DDR3-1333) Registered CAS-9 Memory Kit Can I then use the old 500662-B21 memory in...
View ArticleRe: DL180 G5 firmware flash error on POST
Just today I discovered which are the proliant models that work with similar mother boards . My troubles are related to a SE1102 Proliant on which I'm not able to slow down the fans. At this time I...
View ArticleRe: ML110 G7 fan at 100% with P420
unfortunatelly I was too mutch optimistic I upgraded BMC ROM up to 3.20 but the server still had that trouble so I understood that sometime it runned fans at 14000rpm and other times at 10.000 rpms...
View ArticleRe: Replace non-failed hard drive in Array
An older smart array guide is telling: If the array is configured for fault tolerance,all other drives in the array are online, and a predictivefailure alert is received or a drive capacity upgrade is...
View ArticleRe: ProLiant ML350p Gen8 server ambient temperature sensor problem
there are many agent not installed on your server, please update it using the full ISO of HP Service Pack for ProLiant (SPP) Version 2014.02.0...
View ArticleRe: [Smart Array Controler]E200 - POST Error 1794
Hi, here is the reportit is on HP Array Diagnostic Utility Thx
View ArticleRe: ILO console from a Windows 8 Desktop.
I know this is an old post but for a quick fix, under the Advanced tab in IE Settings you can uncheck all of the TLS options (1.0, 1.1, 1.2) and have SSL 2.0 and 3.0 checked and then it worked for me....
View ArticleRe: [Smart Array Controler]E200 - POST Error 1794
First of All your server is out of datePlease update it using SPP :http://h17007.www1.hp.com/us/en/enterprise/servers/products/service_pack/spp/index.aspx after that send me new ADU :)
View ArticleRe: ProLiant ML350p Gen8 server ambient temperature sensor problem
scharchouf wrote:there are many agent not installed on your server, please update it using the full ISO of HP Service Pack for ProLiant (SPP) Version 2014.02.0...
View ArticleRe: ProLiant ML350p Gen8 server ambient temperature sensor problem
But ASAIR this sensor is not on the system board, but somewhere on the front panel.Ask the official HP support for support.
View ArticleRe: ProLiant ML350p Gen8 server ambient temperature sensor problem
you're right, except that the concern of the sensors apart I found that a lot of agents are not installed as the PMC is not touve type of OS installed. so I asked an update with the latest SPP for the...
View ArticleRe: HP DL 380 G5 biggest SAS 10K hard disk size
Thank you very much !Accordingly to this document we can use any of these drives SAS Hot Plug SFF (2.5-inch) Enterprise (ENT) Drives HP 900GB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr...
View ArticleRe: ProLiant ML350p Gen8 server ambient temperature sensor problem
Hi, I updated the firmwares which were detected as older versions, but didn't help. I have looked around the case of the server and I suspect the sensor to be installed in the left (looking toward the...
View ArticleRe: HP DL 380 G5 biggest SAS 10K hard disk size
yes, it'a always related to Controller Card installed on server
View ArticleRe: ProLiant ML350p Gen8 server ambient temperature sensor problem
On ML servers, the ambient sensor is usually a Diode that is located on the front of the chassis and a cable with two wires (red and white) connects this diode to the system board. Check the cable....
View Article