Re: DL585 G2, Smart Array 642 , Windows 2012
Just to say removing the driver for the Smart Array 642 then running the SPP and once the server rebooted reinstalled the driver for Windows 2008 x64 (cp010823.exe) did the trick.Thank you for your help.
View ArticleRe: DL585 G2, Smart Array 642 , Windows 2012
simply remove the driver already installed, following it to the server with the SPP and everything should work perfectly.
View ArticleMaintenance switch DL160G Stuck
One of my DL160 has a problem where during the POST, it gets stuck with the message: Maintenance switch detected in the "On" position. Power off the server and turn switch to the "Off" position. There...
View ArticleRe: Maintenance switch DL160G Stuck
ther's System maintenance jumper position http://h20628.www2.hp.com/km-ext/kmcsdirect/emr_na-c01728029-10.pdf
View ArticleSATA ports
Hello, does hp server have more than 2 SATA 6.0 Gb/s Ports? Intel C224/C226 chipsets have more than 2 SATA 6.0 Gb/s Ports but is there an hp serever with that chipsets? Or do i have to use hardware...
View ArticleRe: Maintenance switch DL160G Stuck
I can't seem to understand why it's not working, my other servers has the same jumper position.This is the system that is't working:http://i.imgur.com/6y9L8LC.jpg
View ArticleRe: HP DL320e
You can find the Gen8 drive trays on ebay and several big online retailers. Regular SATA drives should work fine.
View ArticleSlow SSD in DL380 G8
Hi Guys, i've have a problem with slow SSDs on a DL380 g8. There are 2 HDDs à 300 GB built in and 2 SSDs (200 GB; original HP). The Controller is a P410i with 1 GB. The HDD are configured in an Array...
View ArticleRe: HP Proliant DL380 G5 NIC's not found after firmware update
Thans to Saturas and Letze01 posts. I made the same procedure as hase3d did and it WORKS!The only problem is that these NICs are not detected as HP 373i embedded any more (now the manufacturer is...
View ArticleRe: Proliant G6 -Change Failed SAS Disk
Looks like my post has been moved to the correct forum. Thanks Just I got an answer from our local HP Tech Services that I can just change the failed disk with another compatible disk even if it is...
View ArticleHow to replace hot swapable Harddidk with used HDD
Hi All, i have RAID 50 configured and now one haddisk is failed so i want to replace it but i dont have new HDD with same size, can i put used harddisk which has old server data? is it possible or do i...
View ArticleRe: HP Proliant DL380 G5 NIC's not found after firmware update
I would appreciate the ISO. I have been on the phone with HP for 1.5 hours so far and they can't find a solution. I have referenced this post but they don't care what ya'll have to offer.
View ArticleRe: How to replace hot swapable Harddidk with used HDD
Generally you can repace a failed disk with one of a larger size. If the disk contains old array information it can cause problems.
View ArticleRe: Slow SSD in DL380 G8
What model are the HDD's and what model are the SDD's If the SDD's are the 200 GB SATA drives, I think they are spec'd at 235 MiB/s
View ArticleRe: How to replace hot swapable Harddidk with used HDD
Thanks. if i remove the old data and array on used HDD after that can i use it without any problem? RegardsAli
View ArticleRe: HP Proliant DL380 G5 NIC's not found after firmware update
http://we.tl/v9GQstMkhK and use hase3d's steps. regards, Marko
View ArticleRe: How to replace hot swapable Harddidk with used HDD
Yes, if you remove the old array information you won't have any issues
View Article