Shrinking RAID-5 Volume
Hello all, I have a DL380p Gen8 server that is configured for RAID-5. The OS is server 2008 R2. There is roughly 600Gb of space on C: drive. Is there for me to shrink the volume and create a separate...
View ArticleDo the HP DL360 G5 RHEL P400i SAS Driver can install on CentOS?
Hi all, I am new on HP DL360 G5. Yes I know it is old, and I find some 2nd on the market, so I want to buy one of this for my self learning and using. Some of questions ther is, I want to install the...
View ArticleRe: HP ML350e Gen8 Fan Noise
I had some issues with fan noise on a ML350p Gen8 (first one we'd bought). That turned into an issue where the fans weren't properly making their connections. What I've seen lately is 6 of our ML350p...
View ArticleRe: Shrinking RAID-5 Volume
Hello hussai7 First of all don't change the RAID side of things at all unless you are doing something with the physical disks or require more space than you 'sliced' the logical drives into. In that...
View ArticleRe: E200 Smart Array failed drive
Have you tried putting the original disk into slot 4?When the server is rebooted, the array controller should notice that disk positions have changed and automatically sort it out for you.If the array...
View ArticleRe: ML370 G4: Will Windows recognize data arrays after OS array is changed?
To be safe, I would remove your two pairs of mirrored drives - D: and E: (data only) also, until you have the new OS up and running on the two new drives.Once you reinsert them and start up the server...
View ArticleDL380 G5 array SCSI 320 VHDCI
i have just got a proliant dl280 g5 server and i would like to connect my old arrays form my dl380 G3 to the new server but i cant find a SCSI card that will do what i would likei have 1HP StorageWorks...
View ArticleRe: Shrinking RAID-5 Volume
Thanks so much Dave.I was so paranoid in not bringing the liver server down with a lot of users on it that I was second guessing myself.Thanks againMike
View ArticleRe: HELP.. 3 new 628059-B21 came up SMART fail after first reboot (DL 180 G6...
Well as it turned out all three drives were bad.. In the end I had to call the HP SErvice number from a carepack on another server and explain the situation. Once that was done the service process...
View ArticleRe: ml310e Gen8 Base System Device driver needed
I found out it was the iLO Channel Interface Driver. I found this out by running Intelligent Provision, but it too failed to update anything because no iLO Channel Interface had been set. I then...
View ArticleRe: DL380 G5 array SCSI 320 VHDCI
is this card compatable with my DL380 G5 HP Smart Array 6404/256 RAID Controller 309520-001 273914-B21 256MB U320...
View ArticleRe: DL380 G5 array SCSI 320 VHDCI
Hi Dan, Yes this is the reccomended card for U320 SCSI Array controller on the DL380G5. To get this to run you will also have to purchase the following riser:- Mixed Riser Cage Option Kit...
View ArticleRe: 6 Fan jumper for Fan-board 442955-001
Thanks for responding. The PCB doesn't show which pin is #4, just 1,2,5,and 6. I think it is under pin 1 (because there is what looks like the number 4 stamped on the black plastic connector) but am...
View ArticleFan board 408791-001 jumper
Does anyone know what pins are actually jumped by the installed jumper on the J7 (Fan 6) connection of this PCB? -Thanks
View ArticleRe: ProLiant DL360 G5 New Memory Issue
I'm looking to upgrade the memory too. Please advise if anybody found the right memory that works for this unit. Thanks Help Please!
View ArticleHP Smart Update Manager, unable to connect to CIM Service on ESXi 5.0
Hi, I have a bunch of HP DL380p G8 servers built with ESXi 5.0 Update 2 using the HP custom ESXi install ISO. All of the hardware integration is accessible via vCenter, so it would appear that the CIM...
View ArticleRe: ML350 Server Won't boot to OS
Many times running ADU will smack the controller in the head (like slapping the side of an old TV ) and put everything back in working condition. It doesn't appear it has helped in your case. The...
View ArticleRe: HP Smart Update Manager, unable to connect to CIM Service on ESXi 5.0
Further to this, I can see a successful network connection on SSH and then 5989 when it is doing the scan, so I don't think it is a firewall issue.
View ArticleRe: HP Smart Update Manager, unable to connect to CIM Service on ESXi 5.0
I have worked out why this is happening. In order to clear an erroneous Hardware Storage Status warning in vCenter I had installed the Recommended HP Update "* RECOMMENDED * HP Agentless Management...
View Article