Re: ML350 Gen8 Wiping RAID drives
Hello Thanks for your support.Despite of some success in wiping disks, I want to make this servers as user friendly as possible.Few questions:1. I create next Intelligent Provisioning Recovery Media -...
View ArticleRe: More Network Adapters
Hi There,Yes, you can install 3 network adapters in DL 380 Gen8 & Gen10 servers. Cheers.
View ArticleRe: ML350 Gen8 Wiping RAID drives
First you should read about ILO in the ILO user guide. This will answer a lot of questions.Inspect if your ILO has the NAND issue, If yes, try to fix it. Reinstall IP, create the image using the USB...
View ArticleRe: ML350 Gen8 Wiping RAID drives
I created bootable Intelligent Provisioning Recovery Media DVD version 1.71.DVD boots normally but after "Verifying System settings" and "This may take up to 30 seconds" warning screenProgress bar...
View ArticleRe: ML350 Gen8 Wiping RAID drives
This is exactly why I sent you the other link about the NAND issue.You need to format the NAND first.
View ArticleRe: ML350 Gen8 Wiping RAID drives
HelloIn meantime I checked server boot ILO F8 menu and removed previous admin account.Still no success with recovery DVD but somehowbutI got into menu named Option ROM Configuration for Arrays ver....
View ArticleRe: ML350 Gen8 Wiping RAID drives
You should try to repair the NAND anyway, it is an essential server functionality.
View ArticleRe: Need Advice on Expanding Storage on DL380 G7
Hi,Power - You can use HP Power Advisor at "https://paonline56.itcs.hpe.com/?Page=Index" , to calculate power usuages and based on that you can decide whether you need power supply upgrade.Fan/cooling...
View ArticleRe: New smart array controller dl 160 gen10
As mentioned, S100i supports only SATA drives. You may proceed to install 869079-B21 -HPE Smart Array E208i-a SR G10 LH Ctrlr + 866448-B21 -HPE DL160 / 120 Gen10 8SFF SAS Cbl Kit and configure one...
View ArticleProblem with Gen10 Service Pack for ProLiant (SPP) Version 2019.12.0
Hello,I am having a problem booting the ISO Gen10 Service Pack for ProLiant (SPP) Version 2019.12.0Gives me the message: you need to load the kernel firstCould anyone solve this issue?thank you
View ArticleRe: Problem with SPP one ml350 gen10
Hi,I am having the same problem. could anyone solve it?thank you
View ArticleProLiant DL385 Gen10 plus - PCI spliting / bifurcate
hi everyone.I am looking at and contemplate a purhcase of these servers and I wonder if are is "PCI split / bifurcate" support from this model(or any HPE servers, I've never owned one).I'm reading user...
View ArticleRe: ML350 Gen9 P440 Expansion - Connection instrucrtions
Hello Thanks a lot !! Well this is a PCI card indeed. This is not the P440ar but the P440.I was wondering if you had a connection wiring schema : i have the cable but have not clue where to plug it...
View ArticleRe: ML350 Gen9 P440 Expansion - Connection instrucrtions
HelloThanks a lot !!Well this is a PCI card indeed. This is not the P440ar but the P440.I was wondering if you had a connection wiring schema : i have the cablebut have not clue where to plug it...
View ArticleRe: Port 84/85
Hi there,I have the same problem with DL385 G7. After check CPU, RAM, Temperature booting not continue. Port 84 blinking on position 7. Did you lucky with resolution?I tried unplug everything except...
View Articlex64 Exception type 0x12 in ProLiant DL380 Gen10 Server
Hi, I've a ProLiant DL380 Gen10 server and I installed it RedHat 7.4 Operative System, but when a finished the installation and the server restarted, it only shows a red screen with the x64 Exception...
View ArticleRe: End of Support for ProLiant Series
Hi Jon,As per quickspecs, please find the list of Retired products. EOL/EOS for these products are yet not decided.ProLiant BL460c Gen8ProLiant DL380p Gen8ProLiant DL360 Gen8ProLiant DL360...
View ArticleRe: ML350 Gen8 Wiping RAID drives
I used method 1NAND format via the iLO GUI1. The iLO 4 GUI login will display a warning if the iLO has reported a self-test error on the Embedded Flash/SD-CARD.Self Test Results in Diagnostic...
View ArticleRe: DL380 Gen10 M.2 enable
Is their another replacment riser card that supports M2. nvme
View ArticleHP DL380 Gen9 Server Stop Code "NMI HARDWARE FAILURE"
Hello All,Required help to troubleshoot "NMI HARDWARE FAILURE" Stop code with BSOD received on HP DL380 Gen9 server during running condition. This server was running well before receiving this stop...
View Article