Re: SAS drive Firmware Update
Hi,Smartarray firmware does not dynamically update the parameter called 'Minimum good firmware revision'. Due to this, the value of this parameter is still holding the version from the old/replaced...
View ArticleRe: Question about Smart Array B320i
Well, the question was not about the disks... they work fine.The question was why I see 0MB of cache when I installed a 512MB module?Is cache only activated when the SAS license is installed?
View ArticleRe: FW Update HP Ethernet 10Gb 2-port 560FLR-SFP+ Adapter über OneView mit SPP
Hi,This is not true i believe.I have reviewed component release note of SPP 2019.09 and i can see firmware and driver for 560FLR in...
View ArticleDL360p gen8 - SAS drive LED not working
Hello,I have a DL360p gen8 server.- in bay 1 to 4 I got 4 HP SAS drives EG000300JWSJP with latest firmware HPD2, drives are installed in their original caddies P/N 651687-001, array is RAID5 and...
View ArticleRe: DL360p gen8 - SAS drive LED not working
Hi,Please refer HPE ProLiant DL360p Gen8 Server - LED Indicatorshttps://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-c03245333#N10860Check Drive LED Definitions on that. Regards,Sudhir
View ArticleRe: ILO LDAP Configuration not working
Hi Johannes, Kindly verify the pre-requisities mentioned in the user guide and provide us with the outcome. Prerequisites for configuring authentication and directory server settings:1.Verify that your...
View ArticleRe: ILO LDAP Configuration not working
Hi,I only want to use LDAPs and no Kerberos till now and from what I understand this is not a requirement?All the other things are correct implemtented.From what i was seeing is that the Directory User...
View ArticleRe: DL360p gen8 - SAS drive LED not working
Hi,thanks for your comment, I'm not asking how it should work, since this is not the first server i put my hands on.I'm reporting a problem!I have 4 HP disks in their original caddies, where the...
View ArticleRe: Fake hard disk frames for Gen8-Gen10?
I experienced exactly the same problem. We do a lot of changing from G7 to G8 frames... also mounting SSDs in G8 frames. And normally there is no problem if you take frames from defective original...
View ArticleRe: DL 380p Gen8 : System Power Fault Detected (XR: 24 00 MID: FF 0D FC 0E C0...
Hello ronissac,I have similar error code, how can I decode the error code ?Thank you in advance !
View ArticleRe: Error when updating SSD firmware "Update not attempted. All selected...
Hello,You have to reboot the server after the firmware update.Read the installation instructions before firmware updates. Regards,
View ArticleRe: Question about Smart Array B320i
Hello,Follow the below steps to isolate the issue.1. Reseat the cache module.2. Check/update the SA controller firmware.3. Log a support ticket if the issue still persists.If you feel this was helpful...
View ArticleRe: DL360e Gen8 post message 261 - Server Platform Services Firmware Flash
Hello,Please clear the NVRAM to follow the below documents ( Page 79)HPE ProLiant DL360p Gen8 Server Maintenance and Service Guidehttp://h20628.www2.hp.com/km-ext/kmcsdirect/emr_na-c03242811-9.pdfIf...
View ArticleRe: Disk Drive Firmware Update Recommended
Thank you! I was using SPP 2017.0.4, and I was able to figure out the installation of the firmware using the instructions provided on the individual download pages. I just copied the files onto the USB...
View ArticleRe: DL380 Gen10's LFF hard drive caddy
The LFF caddy only reference for newer Gen9/Gen10 servers with the two leds on the left is 774026-001But the DL380 g10 seems to use the previous gen from the ML350Gen8 with the round lights, which is a...
View ArticleDL360 Gen9 - Internal Storage Enclosure Device Not Authenticated As Genuine
Hello,Since we updated every firmware using HP SSP (P26940_001_spp-2020.03.0-SPP2020030.2020_0319.22.iso) we started receiving this error for 2 drives. "Internal Storage Enclosure Device Not...
View ArticleRe: DL360 G7 all 4 HDDs in amber led error at boot
I have once again booted the iso you provided from thumb and entered the Raid Utility. The same warnings apply. No cache and no disks found. The reporthttps://pastebin.com/D9zEfMNuThe date in the...
View ArticleRe: HP HP ProLiant ML310E Gen8 Fan Problem
Hi ,yes, it's power supply fan rev up/down. (both)I try to remove, reset.I update bios and ilo firmware.The result is the same I haven't a spare power supply from other server
View ArticleRe: HP HP ProLiant ML310E Gen8 Fan Problem
Hi,I believe you need to replace them.You should raise a support case with HPE if server is still under contract. Regards,Sudhir
View ArticleRe: DL360 G7 all 4 HDDs in amber led error at boot
Hi,Please share POST error/message snap .also check and post drive status from the SSA (Smart Storage Administrator). Regards,Sudhir
View Article