Embedded Flash/SD-CARD: Failed restart. Embedded Flash/SD-CARD: Restarted.
hello everyone, I have this problem for almost 3 months and I couldn't find any solution for it on the internet so I decided to put it here. I have 2 logs in my ilo that I think my server freezing is...
View ArticleAdvice please! dl380 G7. Drives recognised in iLO3, but not in p410i - 0...
Hi all. i hope you can advise. I bought a DL380 G7 server with 16 drives (10 900gb + 6 146 gb)The seller (bargain hardware) advised before purchase "No RAID, RAID & HBA-Mode controller options...
View ArticleAdvice please? DL380 G7. Drives not recognised. Raid controller questions....
Hi all. i hope you can advise. I bought a DL380 G7 server with 16 drives (10 900gb + 6 146 gb)The seller (bargain hardware) advised before purchase "No RAID, RAID & HBA-Mode controller options...
View ArticleRe: Compatible GPU for HP DL380p Gen8 Server
Do yours run at 52 % fan speed and how did you power the GPU? Thank you
View ArticleRe: Compatible GPU for HP DL380p Gen8 Server
No idea about fanspeed, I'll have a look. Powered through regular gen8 psu.
View ArticleRe: Embedded Flash/SD-CARD: Failed restart. Embedded Flash/SD-CARD: Restarted.
Hello. i am answering because this entire HPE forum thing is full of dead weight. they look but don't respond. so i thought i'd break that. In case of a freezing system, (i work with pc's mainly) i...
View ArticleRe: HPE Dignostic util gets systemdiags.efi.sig file not found
Greetings!Was it working fine before installing IP version 3.46?The .sig file that you have referred to is part of IP. Have you tried downgrading IP or re-installing IP?
View ArticleRe: Embedded Flash/SD-CARD: Failed restart. Embedded Flash/SD-CARD: Restarted.
seehttps://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-a00048622en_us
View ArticleRe: Embedded Flash/SD-CARD: Failed restart. Embedded Flash/SD-CARD: Restarted.
Hi afshin980..just to add to my previous reply. the best way to get a correct answer on the internet, is to propose a wrong answer.human nature:muth*********rs cant wait to show themselves as...
View ArticleRe: HP proliant Gen10 Server RAM upgrade
You should check which CPU current your system use.For E-2100 or E-2200 with DL20 , it need ECC only DDR4, so the label will be ED1,ED2 or EE1For other higher model of DL Gen10 like DL380,360 , it...
View ArticleClik here to view.
Re: Installing Server 2019 on ProLiant DL380 Gen 10 with HPE Smart Array...
I get MSDN version leaste Sep win 2019 iso, and use IP mode to install it for my DL20 Gen10 , same way to put ISO in usb and load it from IP. no problem .The IP GUI show any error when you select your...
View ArticleClik here to view.
Re: HPE DL20 Gen10 - RAID Adapter
When you use the Server Raid card ,you should install the OS through Intelligent Provisioning mode GUI, it will add the Raid and chipset driver to your ISO. I use the DL20 with 2019 server os install...
View ArticleClik here to view.
Re: DL20 Gen 10 - Which HW options are required to add M.2 NVMe Boot Capability
DL20 Gen10 could direct installl nvme card to mainboard. Also you could install other two M.2 NGFF SATA SSD in PCIE slot with a kits. I plan to install them both.
View ArticleClik here to view.
Help with DL20 Gen10 NVME card installed - all Fans at 85%
I get new DL20 Gen10 Server with 4SFF model, I use it for my home lab with other DL320E G8 and DL20 Gen9.I installl a 1TB NVME SSD card(micron 2200) direct to systemboard nvme slot. after I install it...
View ArticleClik here to view.
Re: DL20 Gen9 don't have SR-IOV enable switch in the bios(RBSU)
I get new DL20 Gen10 , from the quickspecs file , it already notes this model not support SR-IOV. But I don't see the in the DL20 Gen9 quickspecs file Network ControllerHPE Ethernet 1Gb 2-port 361i...
View ArticleRe: Help with DL20 Gen10 NVME card installed - all Fans at 85%
I read the quickspecs ,some page say the option parts is seagate 240/480g 22110 ?When installing seagate NVMe x4 M.2 400/480GB SSD module, the supporting ambient temperature should be under 30°C (86°F).
View ArticleClik here to view.
Re: Embedded Flash/SD-CARD: Failed restart. Embedded Flash/SD-CARD: Restarted.
hi Torstenthank you for your response but I don't have any problem with ilo health.the problem is my server freeze in server boot and I have to reset the server to bring it back.problemilo health
View ArticleRe: Embedded Flash/SD-CARD: Failed restart. Embedded Flash/SD-CARD: Restarted.
hi Robbie take it easy man :))))thank you so much for your response, I checked whatever you have been said so I changed the sd card and I didn't have any freezing until now. I will tell you the result.
View ArticleRe: Compatible GPU for HP DL380p Gen8 Server
Using MSI afterburner software. Fan is at 30/40% when on regular desktop work.
View Article