Re: PL ml10v2 issue
Hi Chriswys , Is there any front panel LED indications ?. You can refer the following quickspecs document ;https://h20195.www2.hpe.com/v2/GetPDF.aspx/c04567802.pdfIf no LED indications , swap the...
View ArticleHPE disk configurator
Morning all.I have an ML350 G8 which currentlly has 3 450GB drives configured into a raid 5 array. I would like to increase the second logical drive by 250 GB .Are there any drive configuration...
View ArticleRe: ML110-G5 don't startup anymore
the 1ste ML110G5 serverboard has 3 leds green on(power on, standby on, heartbeat), no sound beepsthe 2de ML110G5 serverboard has 2 leds green on(stanby on, heartbeat on) , no sound beepsI think that...
View ArticleHP DL380 G9 with P440AR RAID Expansion
Have a server DL380 G9 with 6 x 600GB SAS 15K 2,5" disks. There is one logical drive. This is configured as a RAID 1+0 (3 x 600GB mirrored) and we wish to expand this array by 2 drives and extend the...
View ArticleServer RAID Configuration problem
( 292 - Invalid hpe software raid configuration . hpe b140i sw raid mode is NOT supported when the mode is configured for legacy bios mode . Action : Configuration the boot mode to UEFI mode if using...
View ArticleRe: Server RAID Configuration problem
From message ,that server current use legacy bios mode boot up. hpe b140i sw raid mode is NOT supported in this mode.It request server reboot with UEFI mode bootloader, what OS your server running...
View ArticleRe: DL20 install OS on M.2 NVME
I have the install nvme card and fans run 85% issue too...
View ArticleClik here to view.
ML110G9 Couldn't Present power reading
I upgrade my ml110 g9 server with a set rps power kit and two 750w power supply, to replace my 350W power supply unit. But it not like my gen10 system, after I install new RPS kits , it doesn't show...
View ArticleRe: ML110G9 Couldn't Present power reading
already use spp 2020.09 update iLo and BIOS.
View ArticleRe: DL580G8: System Power Fault Detected XR: 10 00 MID: FF 0F F0 00 00 FF 3F...
Helo,Can u help with my code? same error but with HP microserver Gen8 (all fiwmare/bios updated) System Power Fault Detected (XR: 20 A2 MID: FF F5 FE 01 FF FF FF 06 06 00 00 02 00 05 40 80 00 00 00 00...
View ArticleRe: HP DL380 G9 with P440AR RAID Expansion
Hi there, Guide for array expansion and logical drive extention. https://support.hpe.com/hpesc/public/docDisplay?docId=mmr_sf-EN_US000010855 As you are performing this on RAID 1+0. I recommend to add...
View ArticleRe: ML110-G5 don't startup anymore
Hello Boyz_PC,I think yes the Motherboard could be the faulty component here.Just another suggestion would be to swap the parts from a spare working setup one at a time and check if it helps to isolate...
View ArticleRe: HPE disk configurator
You can use HPE Smart Storage Administrator (HPE SSA) utility to check existing RAID configuration.HPE Smart Storage Administrator (HPE SSA) for Windows...
View ArticleRe: HP DL380 G9 with P440AR RAID Expansion
Hi Is there a public access version of the provided link, as it is telling me I do not have permissions to open this docThanks
View ArticleRe: HP DL380 G9 with P440AR RAID Expansion
Try accessing the below link.https://support.hpe.com/hpesc/public/docDisplay?docLocale=en_US&docId=mmr_sf-EN_US000010855
View ArticleRe: HP DL380 G9 with P440AR RAID Expansion
I am able to open both the links . I am not even connected to my office network. Open SSA > choose logical devices >Array “x” > manage data drivesSelect the drive you want to add > add...
View ArticleRe: HP 360 G7 server, ACU and orca cannot set the third logical drive
Hello, Problem statemen tis not cleared. What do you mean by (After the second drive is created, the drive can no longer be created.)1. What is the Smart array controller model and firmware version...
View ArticleRAM Problem HP Proliant DL380 G5
Hallo zusammen,ich bräuchte mal euer Expertenwissen.Ich bin im Besitz eines HP ProLinat DL380 G5.Dieser hat von mir satte 64 GB Ram bekommen und lief ohne Probleme.Jetzt meckert er plötzlich wenn ich...
View ArticleRe: HPE disk configurator
Hi Thanks for confirming this as this is what I was planing on doing. Best regardsAndrew
View Article