Re: ProLiant ML350p Gen8 - System Fans constantly stepping up to 100%
Sure the ILO is OK?Please check this:https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-a00048622en_us An ILO with NAND issue may no longer control the fans, hence they speed up to the max.
View ArticleHP Proliant DL380 Gen9 OS (RHEL 7.9) Installation Issue
Hi Everyone,As stated in the subject I am having issue while installing OS. The issue is. There was already an OS (RHEL 6.8) was running on the server. I wanted to re install the OS. For that, I...
View ArticleRe: ProLiant ML350p Gen8 - System Fans constantly stepping up to 100%
Our server was showing none of the signs listed as having a NAND issue, all status's were showing as healthy... despite this however ... i performed the local command line NAND reset, and my prayers...
View ArticleRe: ProLiant ML350p Gen8 - System Fans constantly stepping up to 100%
What ILO firmware version are you running?
View ArticleRe: ProLiant ML350p Gen8 - System Fans constantly stepping up to 100%
iLO 4 v.2.76 Perhaps a bit over eager to declare victory ... as after a short delay the fan speeds are now ramping back up again... sigh... are there any other hidden nuggets of knowledge you can offer...
View ArticleRe: ProLiant ML350p Gen8 - System Fans constantly stepping up to 100%
You won't probably need the SPP. All components are free available except BIOS.Check the lastest BIOS, it may be free too since it is a critical fix (due to Intel security issues).However, check IML,...
View ArticleRe: ProLiant ML350p Gen8 - System Fans constantly stepping up to 100%
I tried updating everything I could think of previously, bios is running the latest version, no impact on the issue...I’ve checked the IML logs, and reviewed the temp readings in iLo and all are stable...
View ArticleClik here to view.
DL380 Gen 10 swap LFF Drive cage for SFF
I have a DL380 Gen 10 which was ordered incorrectly (P19717-B21). It should have one 826690-B21 Gen10 Premium 6 SFF SAS/SATA + 2 NVMe or 8 SFF SAS/SATA Bay Kit but it arrived with the 8 LFF. Can I...
View ArticleRe: HP ProLiant DL360e Gen8 Server, RAID controller, questions.
, i think you should consider creating a new topic to get replies
View ArticleRe: HP ProLiant DL360e Gen8 Server, RAID controller, questions.
Thanks mate, however we did solve it by downloading the updated Riad SW from the HPE support page
View ArticleRe: HP ProLiant ML150 G5 BIOS Recovery - No POST.
Hello, I have same problem in dl360 g7 can you tell me how you did this? [I tried to re-flash the SPI EEPROM using an external programmer to the latest BIOS...
View ArticleSFP compatibility with mikrotik
I have a 10GB nic 530-FLRWill it work with a mikrotik RB3011UIAS-RM router?Mikrotik saysNote: MikroTik devices and SFP/SFP+/QSFP+ modules do not have any restrictions for other vendor equipment.As long...
View ArticleAdding a ethernet pci-e nic to a proliant
Will any (cheap) pci-e nic work on a DL360p G8 or it need to be a HP specific one?
View Article819079-001B
Hi all,I have just bought a spare part hard drive 819079-001 and I received the hard disk with a letter "B" at the end ofthe main part number: 819079-001B.Does anyone know what that letter means?the...
View ArticleRe: DL380 Gen 10 swap LFF Drive cage for SFF
No, it's a physically different sized chassis.
View ArticleTEMPORARILY CHANGE DL380 RAID CONTROLLER HARD DRIVES
Dear experts,I have a question about replacing dl380 G8 ssd hard drives with RAID 5:I want to remove all drives and keep somewhere safe for a few days. And, insert new drives and use the server...
View ArticleRe: TEMPORARILY CHANGE DL380 RAID CONTROLLER HARD DRIVES
wrote:Dear experts,I have a question about replacing dl380 G8 ssd hard drives with RAID 5:I want to remove all drives and keep somewhere safe for a few days. And, insert new drives and use the server...
View ArticleML310 G8 V2 - Unable to update Intelligent Provisioning. iLO and IP displays...
I have seen some threads regarding this issue and also some links to support documents.The iLO was successfully updated to 2.77 on both my ML350p G8 and ML310 G0 V2.The Intelligent provisioning update...
View ArticleRe: pcie layout of hp dl585 g2
Hello,This is an EOL server, now this is very difficult to identify.I would suggest you have a proper case be logged with HPE.Regards,
View ArticleRe: INCREASE RAID 1 on Server - Blade - HP - WS460c Gen9
Hello,As per your first POST, your server is running RAID 1 with the 120GBx2 HDD.Now you want to use 200GB SATA SSD.Yes, if you remove both the hard disk from the RAID 1, you can lose your data.I would...
View Article