Re: DL380 G3 hotswap hard drives??
This server has a Smart Array 5i by default, so hot swap is supported for all RAIDs except RAID0. A RAID 0 will not survive, you need to rebuild it after swapping out the drive.
View ArticleMix branded CPUs
Hello, I need to add an additional Intel Xeon E5620 to my ML350 G6. Unfortunately it is out of stock for all distributers and they cannot get any information on when it will be in restock. However one...
View ArticleRe: Mix branded CPUs
Lookup partsurfer gives: http://partsurfer.hp.com/Search.aspx?SearchText=587476-B21 Product Number : 587476-B21 Description : HP DL380 G7 INTEL XEON E5620 (2.40GHZ/4-CORE/12MB/80W) PROCE 496064-001...
View ArticleRe: iLO4 update failed - Checking HP Secure Digital Signatur
Hi, I can't do it manually through the web interface because it seems firmware flash is in progress (1%).Buttons "Browse" and "Upload" are not available. The following message displays : Checking HP...
View ArticleRe: iLO4 update failed - Checking HP Secure Digital Signatur
Click on the diagnostics tab and reset iLO
View ArticleRe: Cannot Load iLO 2 In Browser - Please Help
Thanks guys.I will arrange the data center to pull the plug and see how we go.Once done if I can log back in I will annoy you guys on how to update the server software as I think it is quite...
View ArticleRe: Network bridging in Windows Server 2012 killing HP Ethernet Adapter ?
Yes, after the port is reopened by the network team, all is good now :-)
View ArticleWindows Server 2012R2 in Proliant ML110G7
Hi, i check inwww.hp.com/go/supportos That this OS is supported by this server. I can't use SmartStart CD because I don't have the option Windows Server 2012, only 2008. Well, I begin the Windows 2012...
View ArticleRe: Windows Server 2012R2 in Proliant ML110G7
Solved, the second time... works... I don't understand...
View ArticleRe: HP DL160 G6 Fan Configuration
I tried all the recommendations. Even took XEON E5620 processor from another server and put them in HP DL160, the same result - shows 30 degrees. I updated the all BIOS as the primary and BMC. Today I...
View ArticleRe: ML350 G5 won't boot, red internal health LED, undocumented system board...
wow it worked, the server is back onthank you very much i need help on this one too 1. the LED health light is still flashing red2. my connected moniter is not displaying3. the noise from the fans...
View ArticleRe: HP DL160 G6 Fan Configuration
Temperature CPU1 sensor Normal operating range 34 deg. C I rolled back to version 4.06 (2009)Temperature sensor is joined, worked exactly 5 minutes. When the installation of the operating...
View ArticleRe: P420 alternative that supports passthrough mode
Hello Cederberg,did you find any solution on this? As we are also facing such a Problem ...Thank youAndreas Schnederle-Wagner
View ArticleRe: Fan Speed Control DL580 g5
Ok, finally I got the System Management Homepage working, I've just download and mounted the HP Service Pack for Proliant, run HP SUM and, wonderfully, the software has recognized all the stuff that...
View ArticleRe: Proliant ML 350 G4 test project
Thank you Johan, that is a l ot for me to digest, I will work on those things and then post my results later. With school it may be a week or two before I get any results.
View ArticleRe: Cannot Load iLO 2 In Browser - Please Help
I just spoke to a mate who is a Linux Technician and he believes he can access my OS through other means but he is not familiar with iLO 2.Can iLO be restarted once he gains access to Linux and if so...
View ArticleRe: Proliant ML 350 G4 test project
Hi, First check if the server actually supports USB Boot?Second check if the server supports Windows 2008 OS?http://h17007.www1.hp.com/us/en/enterprise/servers/supportmatrix/windows.aspx I have...
View ArticleRe: 2.5 inch ssd in ml350 g6 with 3.5 inch bays
Hi, Refer to the QuickSpecs for this server here.http://h18004.www1.hp.com/products/quickspecs/13241_na/13241_na.pdf This server supports:Eight (8) 2.5" (shown) or six (6) 3.5" SAS or SATA hot plug...
View ArticleRe: HP Proliant Diagnostic Utility
Hi, Google for "HP SmartStart CD" and download one for your server (.iso).Boot through this CD and choose Maintenance, under that perform the Diagnostics which is offline. For online download HP...
View Article