Smart Array P420i extremely slow writes
Hi, We have a couple of new Hp Proliant DL380p running Xenserver 6.2 SP1. On one server, the write performance is normal for 1-2 days, and then it drops to 1/50 of normal performance. The read...
View ArticleProliant ML110 G6 Shuts down unexpectedly while booting!
Hi Our HP Proliant ML110 G6 Shuts down unexpectedly while booting.It gets to the process of detecting HD's then shuts off with only a chassis fan light blinking on the motherboardI've been checked all...
View ArticleRe: CPU Upgrade in DL160G8 question about VRM/PPM
yes it is same processor..... One P/N (L21) indicates first Processor in server, the second P/N (B21) indicates the second or add-on processor. Regards, Louis
View ArticleRe: Obtaining OID Number - HP Smart Array B120i
Support was added to the HP SNMP agents for the B120i/B320i in version 9.1.0. What OS are you running?
View ArticleRe: SAS drive update, HP ProLiant DL360e Gen8 and registration, monitoring...
Just a comment....the Gen8 servers use different SAS drive carriers then previous generations. Normally the disks would have at least a 1 year warranty, but in this case I don't know if HP would cover...
View ArticleRe: Obtaining OID Number - HP Smart Array B120i
Found on another article about the HP SNMP Agents as you said - these are not part of the new F10 setup on ML350e Gen8 servers.Once installed all started to work so thanks for the suggestion
View ArticleRe: Microserver Gen8 start fail
In version 1.40 and 1.32, older bios, nothing has changed. The same situation with firmware update - The last firmware update attempt was not successful. Ready for the next update.
View ArticleRe: Microserver Gen8 start fail
akmorp wrote:May be there are some solutions to this problem, in addition to the replacement systemboard?Download the ROMpaq version of the firmware update. This will make a bootable USB key. This...
View ArticleRe: Microserver Gen8 start fail
If you look at the 2 screenshots above, you will the the system hung just while begin of POST and no BIOS available at all (even no backup). So I don't think you can recover from this situation ......
View ArticleRe: Microserver Gen8 start fail
ROMPaq with bootable USB key not help. In screenshot above - server stops on "Processor initialization in Progress" - boot not started. Boot order in iLO not changed - One time boot order cannot be...
View ArticleRe: Microserver Gen8 start fail
Did you try setting switch 6 on to reset NVRAM? If so what did the screen display during this process?
View ArticleRe: Microserver Gen8 start fail
With switch 6 on, on screen the same, IP iLO: unknown, but i connect to iLO.Update firmware need to make the switch 6 is on position?
View ArticleRe: Microserver Gen8 start fail
iLO 1.40, 1.50 with switch 6 on - The last firmware update attempt was not successful. Ready for the next update.On screen - Processor initialization in Progress.
View ArticleRe: Microserver Gen8 start fail
NVRAM reset will not work, because it doesn't boot to the stage needed - the box is bricked.
View ArticleRe: Microserver Gen8 start fail
Torsten may be correct and the box is bricked. Normally when they are bricked, they don't make it into the graphical POST process, they usually hang on the 1st text screen where the percentege is...
View ArticleRe: hp proliant dl380p shutdown automatically
IML = Integrated Management Log. There should be an IML viewer app installed, if you used intelligent provisioning to install or used the Service Pack for Proliant setup.It shows up as "HP Proliant...
View ArticleRe: DL380p Gen8 Running Windows Server 2012 Std., Problem with Intel...
I'd suggest double and triple checking the BIOS settings. That's the only place I can think of where it would actually disable any of the VT options. I can't think of any other reason why they'd show...
View ArticleRe: ACU not showing P410 controller
I don't know about Debian, but in Windows anyway ACU has been replaced with SSA = Smart Storage Administrator.Older Windows versions of ACU still worked on the P410's though, so you may be encountering...
View ArticleRe: HP ProLiant ML150 G6 Base - Xeon E5504 2 GHz
Start here and find your server model, then the...
View Article