Re: ML110 G7 High Fan issue
I mentioned my success with a similar server ML110 G6 a few days ago here Re: (Update) ML110 G6: LOUD FAN noise There are a couple approaches. 1. Make sure in BIOS the [Blow-out] feature is turned on,...
View ArticleRe: HP SmartArray E200 - problem with HD firmware (to HPDF) upgrade
Thanks. I was having the same issue on a P410i controller and this solution worked for me.
View ArticleRe: 12Gb SAS SSD backwards compatibility
Hello,I think you are right. Just keep on mind, this drive is supported only on gen8 server, so you have to use controller in gen8 generation... quickspecs at...
View ArticleRe: Remote Insight interface error. .1.3.6.1.4.1.232.0.9006 nterface error
Hi, what is the name of the file for the CORE driver and what folder is it in?
View ArticleProliant ML310e Gen8 v2, includes Smart Array B120i driver. How to use SAS...
This version of the Proliant ML310e utilizes a HP Dynamic Smart Array B120i RAID Controller, which does Not Support SAS (only SATA) drives. Thus it cannot see the SAS drives I have installed. Do...
View ArticleRe: Help - harddisk sas not detected when install windows 2008 r2
Hello there? Anyone help pls?Thanks
View ArticleRe: ML350e G8 Much slower than ML350 G5 it replaced
The disk controllers are going to be a factor. The old box has a Hardware based Smart Array controller with cache memory. The new server has a Software based Smart Array with no cache. Also SAS drives...
View ArticleRe: ML350e G8 Much slower than ML350 G5 it replaced
I ordered the cache module (and battery which I forgot on the first order) direct from HP. I had already seen data that shows the cache improves disc transfer speeds greatly. Installed a few hours ago...
View ArticleRe: HP ML350p Gen8 Raid 1 - Empty Drives Causes Remote Kickstart Warning Message
What version of RHEL are you running? you may just need to change cciss to sda as the newer versions of the OS use hpsa instead of cciss for the Smart Array. hpsa is a scsi driver whereas the older...
View ArticleRe: Help - harddisk sas not detected when install windows 2008 r2
Set the P222 as the boot controller, and also set the array as the boot LUN
View ArticleRe: Proliant ML310e Gen8 v2, includes Smart Array B120i driver. How to use...
You can add and additional P222 Smart Array controller that supposrt both SATA and SAS
View ArticleRe: Help - harddisk sas not detected when install windows 2008 r2
Hi. Thanks for reply.I've set the p222 as the 1st boot controller.Just wanna make sure that I'm on the right track, I did:Set the sata mode as AHCI ( before: p120i...)Set the 1st boot controller to...
View ArticleRe: Remote Insight interface error. .1.3.6.1.4.1.232.0.9006 nterface error
The false SNMP trap ID 9006 is caused by an old version of CPQSMIF.DLL. This DLL is part of the CHIF driver suite, not the CORE driver suite.That said, I would recommend upgrading both driver suites at...
View ArticleBios Update dl380g6 not working "The software will not be installed on this...
Hello! I just would like to update the BIOS of our old dl380g6 Server. I found the file: "CP021359.scexe" on the downloadsite for our server and tried to execute the file but the server tells me: #...
View ArticleRe: Help - harddisk sas not detected when install windows 2008 r2
you shouldn't need to change the mode of the embedded controller, but it won't hurt anything if you set it to AHCI mode. When in HPSSA you should see both controllers (unless the B120i is in AHCI...
View ArticleRe: ML350e G8 Much slower than ML350 G5 it replaced
If your primary workload is Exchange, more disks=more better. Exchange is a drive thrasher.Your old server had CPU's with a higher GHz but it was an older generation processor... I'd say that your...
View ArticleRe: Proliant DL360 G8 & Server 2012R2
Unfortunately I'm just not familiar with the B320 controllers... I don't have any direct experience with them.I don't know if any of the information in this link would help, but it could be worth...
View ArticleRe: DL160 G6 server Product name changed as DL180 G6!!!
Go into the ROM setup and check the device ID. If it's not the same one on the label where your serial number is also, change it. You might as well check the serial # too in case it's wrong.I don't...
View Article