Re: DL380 G5 - CPU board 255 degrees?
Hello allWe also got this issue on a DL380 G5 after replacing an accelerator batterie pack.Any news?Thanks and Regards
View ArticleML370T01 upgrades? Video, etc.
Hi, I am having trouble finding any documents on this old server. Are there any Video upgrades for it.... What type of slots on the MB support good video cards? Thanks for the help!
View ArticleRe: FWBC on Proliant DL380 G8 - P420i
Hello, sorry but how I can find if FBWC is enabled on DL380p G8? I've enter on Smart Array Bios Config and there is only this option that is disabled: "Enable write cache battery override" Is it? Or...
View ArticleRe: No detailed specifications (PDF) for 726043-425
Link to the quickspecs http://www8.hp.com/h20195/v2/GetDocument.aspx?docname=c04128107
View ArticleRe: FWBC on Proliant DL380 G8 - P420i
When it's booting up, select the option to use the full GUI array config program (sorry, I don't remember the exact key to press). It's different than the usual F8 to enter the more limited...
View ArticleRe: DL380 G5 - CPU board 255 degrees?
It seems like a bad temp sensor and it's just reading 0xFF (255 degrees), or -1 degrees if the program reading it treats it as a signed byte.
View ArticleRe: ML350 G6 Memory Configuration
I'm sorry, I guess I didn't understand at first how you were adding the memory.You mentioned installing the memory in slots A, B and C for each CPU which seems correct. Then you added 2 new modules...
View ArticleRe: Ml310e Proliant Gen8 v2; Hyper-V 2012 R2; Windows 2012 R2 Ess.; slow...
There have been some funky driver issues with VM queuing and those Broadcom drivers.Out of curiosity, what version of the drivers is installed on the host OS and what NICs are installed in your...
View ArticleRe: DL140 G2 No video
Check all the lights. I don't think the DL140 G2 had the nice status display on front but it should at least have an LED that glows amber when off, green when on, and red if there's some error that...
View ArticleRe: iLO4 update failed - Checking HP Secure Digital Signatur
Hi, My server has been unplugged for few minutes and iLO update has been reset. New version (1.50) has been installed and eveything works fine now. I'm closing this case. Thanks for your help....
View ArticleRe: Which PPM for StorageWorks AiO 600?
hi, ML350 G5 is using the same systemboard, so you can try with the ppm from this server - 413980-001, but at your own risk. thanks,
View ArticleML350 Server Not Beeping When RAID Disk Fails.
We use G6 and G8 ML350 servers for our client's servers. But we have found that they do not make a beeping sound by default when a disk fails.. Is this turned off by default or is there any way that I...
View ArticleRe: Which PPM for StorageWorks AiO 600?
The StorageWorks 600 does appear to be a rebranded ML350 G5. They use the same line of processors, so it's probably safe to assume the P/N 413980-001 will work. I'll give it a try. Thanks PGTRI. :)
View ArticleML 350 G5: Internal SAS Enclosure Device Failure (Bay 1, Box 1, Port 2I, Slot 0)
Hi, today in the morning a ML 350 G5 just answered to ping, but did nothing else. No login, No service (ssh, web, Virtual Machines) answering anymore. I had to switch it off hard. After reboot nearly...
View ArticleRe: Setting up Cron on DL380 Server
cpanel is a web based app used by hosting providers to allow customers to manage their accounts. It really has nothing to do with the underlying ProLiant hardware. I haven't used the app in a really...
View ArticleDL380 RAID says drive missing
I am not sure what "generation" the DL380 I'm having problems with is. It has 2 Xeon 2.8Ghz processors which will probably identify the generation for those more knowledgable than me. The server had...
View ArticleRe: DL380 RAID says drive missing
John Rowan_2 wrote: Why is it not seeing drive 2 to reintegrate into RAID 5 array (missing) but seeing it as available to create new drive? Is it because the other 5 are 147.1GB and this is 146.8GB...
View ArticleRe: ML 350 G5: Internal SAS Enclosure Device Failure (Bay 1, Box 1, Port 2I,...
The older log messages from January of this year sound like a drive failed on Jan 7 and was replaced on Jan 23.That's probably unrelated to the event you had this morning where the server was...
View Article