HP System Management Homepage is "read only"? I can't change something
Hi, I have a DL580 G2 with Debian 7 Wheezy and latest hpsmh installed as described here: http://downloads.linux.hp.com/SDR/project/mcp/ Right after installation I was able to access hpsmh and see all...
View ArticleRe: New HP ProLiant DL320 Gen8 v2, empty slots LFF (no hard drive tray's)...
If your asking about the drive caddy that holds the hard drive, they ship with the hard drives.
View ArticleUnable to install SLES on DL 380 g8
Hi All,I tried to install Linux on an DL380 Gen8p without success.distributions were testedSUSE Enterprise Linux 11 sp 2 with HP Intelligent ProvisioningSUSE Enterprise Linux 11 sp 2 with kISOSUSE...
View Articlehp proliant ml350p gen8 загрузка с usb
Здравствуйте, такая проблема установил на данный сервер, программу для электронной сдачи отчетности вставил ключ с ЭЦП (USB), а на сервере создано задания для перезагрузки по времени с помощью...
View ArticleRe: HP iLO4 not working
hi, any other suggestion? I still could not get it to work. iLO still does not work. Thanks
View ArticleRe: HP iLO4 not working
Make sure the iLO isn't setup to use "shared network port" I don't recall if the dedicated port would still show link status when in this mode. when in this mode iLO uses the first NIC port instead of...
View ArticleHP ProLiant SL2500 Scalable System
Hi, How to use and how to found any information about the so called RCM attached to the power sypply of the chassis t2500 ? Can't find the external cable spare or photo ! thank you for any help.
View ArticleRe: HP iLO4 not working
Did you tried to assign different IP for ILO ? if not try to assign different IP and check it.
View ArticleRe: HP Proliant ML110 G7 do not work wake on lan
Hello, i am trying to configure the wol (wake on lan) on an HP Proliant ML110 G7 server with Windows 2008 R2 64-bit, but I can not.I enabled in the bios wake on lan, prepared the boot giving priority...
View ArticleDL360p gen8 2630 - performance issue
I have two new DL360p gen8 2630 server's that I installed W2012 R2 on. I updated bios to the latest versions and used intelligent provisioning when I installed the OS. All was good. Then I shipped...
View ArticleRe: DL360p gen8 2630 - performance issue
Have you verified the network activity on the switch side?Also, sometimes for no reason that I can tell, one of my Gen8 boxes will have an issue with one of the teamed network ports where all 4 show a...
View ArticleRe: HP SUM "Failed to add baseline" No default baseline found.
Agreed that closing a program properly is the way to go - but IIRC that just wasn't possible.When the package is supposed to work with Microsoft server software - it would be nice if HP would test it...
View ArticleRe: DL360p gen8 2630 - performance issue
I disabled 2 of the 4 NIC's in the NIC Team and performance is much better. Is there a tool that can be run to determine if the onboard NIC is failing?
View ArticleRe: Smart Storage Administrator (SSA) GUI issue when performing risky and...
Any response from the owners please?
View ArticleRe: DL360p gen8 2630 - performance issue
The Broadcom Advanced Control Suite (BACS) might be useful to check out some advanced stats on the network ports. It should be on the download page for the DL360p Gen8. I don't know if it's included...
View ArticleRe: Workaround
Giancarlo Zicchieri wrote:Hi I solved the issue modifying with notepad the file c:\autounattend.xmlWhen it appears the command prompt digit notepad c:\autounattend.xmlYou have to search the string...
View ArticleRAID disk fail email notification
I have a ProLiant ML1110 G5 with a 2 disk RAID1 array running Windows Server 2003. The RAID is reporting the it is an Adaptec SCSI RAID I've taken over managing this server, and it appears that there...
View Articleipmi authentication problem with DL380 G6
Hello All, I am really struggling to get IPMI/iLO working on a Proliant DL380 G6 server. When I try to set the authentication using the open interface here's what I get: # ipmitool lan set 2 auth...
View ArticleRe: RAID disk fail email notification
Have you tried installing: HP System Management Homepage HP ProLiant Array Configuration Utility for...
View ArticleRe: RAID disk fail email notification
The ML110 G5 doesn't have a Smart Array controller, it uses chipset RAID which is controlled by a driver (software RAID) The unit also uses an optional LO100 management card which does not provide the...
View Article