Re: windows 8 on ML350 G5
absolutelyand my IT guy tells me I'm a bit off as well.so the server will be updated, and donated to a charity office which can put it to proper use.Thanks.
View ArticleRe: DL980 Memory error
Hello Mastest, these are CORRECTABLE MCEs that occur when the CPU transitions from different c-States (has to do with power saving features of the CPU). As the system transitions from lower power...
View ArticleRe: DL380 G6 Shuts down after POST
Thanks, I've tried both of these and still no luck. Think it's probably a motherboard problem given that the fasn work but are not reconised on POST
View ArticleRe: Can't Boot SPP-2013.02.00 on DL365 (G1)
Torsten. wrote:I would try to create the USB key drive - maybe a problem while burning the DVD?Thanks, Torsten, but -- as you might have noticed --...I'm a Linux user and, AFAIK, the HP USB Key Utility...
View Article600GB SFF disks not recognized at P410i - Firmware Bug?
Hi there, i have plenty of DL380 G7 servers in production and purchased 4 new EG0600FBDBU drives (600GB SFF 10k DP 6G)(according to their label all manufactured in march 2012) and inserted them into...
View ArticleRaid HP ML310e Gen8 E3-1220v2 NHP MC
Hello you all, I want to know if I can install SO and afterwards configure Raid 1.Because I don´t have the disks to configure Raid 1 but yes to install SO. P.S. this thread has been moved from Servers...
View ArticleRe: Raid HP ML310e Gen8 E3-1220v2 NHP MC
You need to download the driver disk that has the RAID driver for your OS to be added during the installation Select you OS, and download the driver / driver update image...
View ArticleiLO will not allow me to install OS, cannot be reset.
on HP Proliant Gen8 ML350e Server. Having problems with this.. While trying to optimized the server install procedure, I tried to disable iLO on the server.Now when I use Intelligent Provisioning, at...
View ArticleRe: iLO will not allow me to install OS, cannot be reset.
If iLO was disabled, it can only be re-enabled by flipping the iLO security override switch on the system board then, going to iLO Option ROM during POST where it can be enabled back.
View ArticleRe: Can't Boot SPP-2013.02.00 on DL365 (G1)
Look into the USB directory - there is the linux version of the USB key utility.
View ArticleRe: ML350 G5 Server died? Replace on same series Server will it work?
If you find a ML350 G5 to replace the current one, if you swap all the hard drives, everything should run exactly as your current server. The beauty of SmartArray RAID controllers is that one...
View ArticleRe: ML350 G5 Server died? Replace on same series Server will it work?
Hi David, First of all, very thank you of your detail answer. One more question there, On the Front Panel LED on my ML350 G5System power LED = GreenInternal health LED = RED (Flash)External health LED...
View ArticleRe: ML350 G5 Server died? Replace on same series Server will it work?
You'd be best off logging into your iLO interface and checking for details of why there's a red alert light. It'd be impossible for me to give you an answer based on just the general indicator.
View ArticleRe: ML350 G5 Server died? Replace on same series Server will it work?
Hi David, Thank you very much, I tomorrow back to company make a try. Wish you all the best and have a nice day. Best Regards,Jimmy Chan
View ArticleSmart Array P800 disabled because of cache module
I'm getting the following error message in my ACU for a HP Smart Array P800 card.Smart Array P800 in slot 7 is disabled because of the cache module is not attached. Please re-attach the cache module...
View ArticleSmart Array P410i on ProLiant DL380 G6 - HDD is not replaced - error
Hi all,I'm new to servers and don't speek English, but: In a RAID 5 disk broke. HP P / N 507119-003 - 146GB 10K SAS.We bought new and replaced it. But the drive does not work - "Deferred write...
View ArticleCannot load SPP from image on DL380Gen8 with ESXi 5.1
We have a number of DL380Gen8 servers with the latest ESXi installed. Also, iLO is activated and licensed. However, when trying to load the latest SPP...
View ArticleHDD Compatility check
Hi, hp proliant 380 g8 harddisk suppoted to hp 380 G6? Please give me link for compatiblity check. Many thanks in advance
View ArticleRe: DL380G5 & SmartStart 8.50
Found a working solution in another post (I switched from Chrome to the download manager in Internet Explorer)."I have just experienced exactly this problem, and have now found the solution. The...
View ArticleRe: Smartstart install progress stops at 27% at hpssbem.exe
Found a working solution in another post (I switched from Chrome to the download manager in Internet Explorer)."I have just experienced exactly this problem, and have now found the solution. The...
View Article