Re: xmldata?item=all over https/443 in iLO1-iLO3
This post on StackOverflow shows someone doing this with iLO1http://stackoverflow.com/questions/1819341/how-to-read-xml-file-from-web-using-powershell iLO3 also works.Is it possible to disable?
View ArticleRe: conrep does not really switch BIOS settings
conrep v3.30 should work just fine on a Gen8. What is the contents of the data file your using with conrep? I'm also pretty sure the default values of those 3 settings is enabled? Are these new...
View ArticleRe: Memory configuration in DL380 G8
Hi, I guess you are referring to ProLiant DL380p Gen8 with Intel Xeon E5-2620 (2.0 GHz/6-core) processor. DIMMs has to be in pairs.When two processors are installed, balance the DIMMs across two...
View ArticleRe: ilo2 (2.15) PMTU discovery broken
The problem also occurs in my setup, with ilo2 firmware 2.15. I have captured a pcap packet trace (stored here: http://www.exp-math.uni-essen.de/~dreibh/temp/ilo.pcap) on a router connecting a local...
View ArticleRe: ilo2 (2.15) PMTU discovery broken
I can also reproduce the problem with Telnet instead of HTTPS. Login from the remote side works (since the Telnet packets are small enough for the tunnel), but e.g. the response to "help" causes the...
View ArticleiLO access not working from the machine itself
My HP ProLiant DL320 G6 servers have iLO activated, firmware version is 2.15. iLO shares the same Ethernet interface with the server itself, both have of course different IP addresses. It is not...
View ArticleiLO SSH configuration
Is there a possibility to activate SSH without providing an SSH key to log in a certain iLO user? I would like to use SSH with passwords instead of keys (as with Telnet). If not, is there a possibility...
View ArticleRe: iLO access not working from the machine itself
This is a known limitation of the iLO on the shared NIC
View ArticleRe: ilo2 (2.15) PMTU discovery broken
The path MTU is fixed in version 2.20http://h30499.www3.hp.com/t5/ITRC-Remote-Lights-Out-Mgmt-iLO/iLO-2-Firmware-version-2-20-released/td-p/6067313
View ArticleRe: ML350 G5 CR59 and CPU replacement
Hi, ML350 G5 Spare Parts page.There are three types of system boards for this server which supports different processors with PATA or SATA optical drives. Also check this doc and QuickSpecs here.The...
View ArticleRe: No Boot on 2nd processor upgrade
I had the same issue - although you may have already done it, just recheck your memory configuration and ensure they are pushed in firmly into their correct slots.
View ArticleRe: Newbie links/references for what fits my HP ProLiant DL580 G5, 2 x quad...
Hi, I run a DL585G2 which although not the same does run a P400 SAS Controller & the same Drive Bays. Non HP SATA - Will work just fine but at SATA 1.5G Speeds Non HP SSD - Will work just fine but...
View ArticleRe: DL380e G8 no disk!!!
I created a RAID 0 Fault tolerance... I can disable RAID, but if i disable it and activate SATA Legacy, i do not see SAS disks under SO istallation....
View ArticleHP DL580 G7
Hi, I need to finalize my ESXi server hardware and Want to know the 10/8/6/4 core is per processor or combination of 2/4 processor . what is the total core i would get from 2 processor * 8 core server...
View ArticleRe: ML350 G5 CR59 and CPU replacement
Hi, When you say you have the D21 bios do you mean you have the latest 2011.05.02 Bios from July 2011? D21 is just the system identifier i.e. all ML350G5's have the D21 bios as thats the system family...
View ArticlePROBLEM UPGRADE FIRMWARE ILO 3 on HP PROLIANT DL 380 G7
Hi, problem to update the firmware of the ILO 3 on an HP ProLiant DL 380 G7 server. Here is the error message when the update in windows (error_ilo3.jpg) I also tried using the web interface, but it...
View ArticleRe: HP DL580 G7
Hi, some information about the processor options available for the DL580 G7 are in the quickspecs: http://h18000.www1.hp.com/products/quickspecs/13669_div/13669_div.PDF So if you have 2 CPUs and each...
View Article