Re: HP DL Gen Firmware Update Problems
>> I then downloaded the Smart Firmware DVD extracted the ISO What version??? You should use SPP02.2013.
View ArticleRe: HP DL Gen Firmware Update Problems
Yes thats the one I used, the latest one from February 2013. But the firmware update wasn't released to the end of May 2013 and therefore is not included on the DVD. That’s why I used the HP USB...
View ArticleRe: HP Smart Update Manager - Crashes ML110 G7
This is not a solution!! I'm having same issues with DL120G7 with latest SPP fully updated There is no bugcheck, and no event to troubleshoot the matter How can we tshoot this ? Are there any logs we...
View ArticleRe: DL380 G6 Loud Fan Noise
What iLO2 version do you have? If iLO2 stops responding for some reason, the system PAL takes over the FANs and ramps them up to max speed. We have fixed numerous issues where iLO2 could stop...
View ArticleRe: DL 380 G6
If iLO2 stops responding for some reason, the system PAL takes over the FANs and ramps them up to max speed. We have fixed numerous issues where iLO2 could stop responding in the last couple of years...
View ArticleHP DL380 ESXi 5.1 hardware alerts / HP SIM
Hello, In the past I have always used HP servers with the insight agents installed via Smartstart. I then connect to the system management homepage on the server and configure the settings I needed...
View ArticleRe: HP DL380 ESXi 5.1 hardware alerts / HP SIM
You still run SIM, the CIM (esxi health agents) talk to SIM, but you can also get a SIM (not CIM) plugin for Vcenter.1. Good idea to run it in a VM to take advantage of esxi HA or Fault tolerant...
View ArticleRe: DL 380 G6
Good thing, on ebay you can get DUAL L5639 (6 core 60 watt!) DL380 with 48gb of low power ram, rps, and 2 drives with rails for like $950 shipped!! that's a killer deal
View ArticleRe: DL380e G8 no disk!!!
PM me if you want to know how to buy a real hp raid card for less than 1 hard drive!
View ArticleWatch out there are fake drive Gen8 sleds with non-hp drives on amazon !!
I bought a 512gb SSD for $400 with HP Smart Carrier! It was a fake carrier with non-hp drive but after looking at the ad it never claime to be genuine! but the B120, B320, and P420 do not see it as...
View ArticleNew ML310e Gen8: P420 RAID Controller is not always seen by BIOS
Hello dear community members, sometimes after the rebooting of my new ML310e Gen8 it does not show the installed P420 RAID controller while POST. As follow, you don't see it in iLO, which is very...
View ArticleRe: HP Smart Update Manager - Crashes ML110 G7
Managed to fix it. In fact the file cp010988.exe IS downloaded to repository configured to get updates from ftp.hp.com. So Move all files from the repository to the swpackages folder itself. In my case...
View ArticleEnabling Jumbo Frames on Dl385p Gen8 running Solaris 10 8/11 (u10) with HP...
Hi, I am having trouble enabling Jumbo Frames on my NICs. I don't know what it is that I am doing wrong. My setup: ProLiant DL385p Gen 8 Server (Product Part# 686853-S01). It has a HP Ethernet 1Gb...
View Articledl185g5 cpu upgrade
Has anyone tried upgrading their dl185g5 to newer CPUs. First a disclaimer, I realize this won't be supported, but I am trying to determine if it _works_. WARNING: to anyone with a dl185g5, beware of...
View ArticleRe: Customer Advisory c01587778
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?cc=cz&prodNameId=266599&prodSeriesId=374803&swLang=8&taskId=135&swEnvOID=1005
View ArticleRe: Proliant ML 350 G6 P410i RAM cache with battery--Battery won't charge
Hi, Some times the issue could be with cache module or cable that connects the cache/battery.ORSome times the issue could be with SMH version or Array Diagnostic Utility version. Try with different...
View ArticleRe: Unfinishing Parity Initialization on smartarray P420/421, RAID 6 ADG...
Hi, What is the firmware version of the controller? See this post. Thank You!I am a HP employee.
View ArticleRe: Unfinishing Parity Initialization on smartarray P420/421, RAID 6 ADG...
Al the firmware are the latest, for the controller it's version 3.54 The server buildin update progam suggests the latest is 3.42 maybe I should downgrade and try again ? can you give me an indication...
View Article