Re: iLO3 1.60 availability?
mccccc123 wrote:Hi there!could anyone hint if there's a kind of comprehensive portal or smth which contains iLO from all HP servers. e.g. I have 10 servers proliant and would like to operate every iLO...
View ArticleRe: iLO3 1.60 availability?
Oscar A. Perez wrote:iLO3 1.60 was pulled due to an issue discovered after it was published to the FTP. Some blades could fail to power on after updating iLO3 to version 1.60 and they required iLO3 to...
View ArticleVersion Control Repository is Busy
Frequently when I have made a couple minor software updates, the Version control agent on all servers stops reporting available software and there is a message that the VCRM is busy. This lasts several...
View ArticleSIM SW colum showing Green even if updates are available.
I am running into a situation where most servers show up green for SW in SIM eventhough there are updates available. Any suggestions are appreciated.
View ArticleRe: Sharing Disks Between Two Servers?
> Then I want to take the remaining four drives from each server and make ONE logical drive out of all eight of them so that BOTH servers could share it as one drive. Which OS would you use? Should...
View ArticleRe: iLO3 1.60 availability?
My understanding is that the existing security bulletin will be updated as soon as version 1.61 becomes available.
View Article2 Proliant DL385p Gen 8 Clustered with a Shared SAN HP P2000 10 GB
Hey Guys, I wanted to share with you the environment I have setup, to make sure if that is correct and/or what are your suggestions, since this is the first time I have setup a SAN environment....
View ArticleRe: Sharing Disks Between Two Servers?
It is all Windows Server 2008 R2. Here is what is transpiring. I have an application installed and running on Server A. I want to add Server B and configure as a cluster. In order to cluster, the...
View ArticleRe: ML350 Smart Array E200i The cache is temporarily disabled
Which version of ACU are you on.
View ArticleRe: iLO3 1.60 availability?
Understood. Since lately quite a few notifications for products to which I'm subscribe haven't been sent at all I'll just check manually a couple of times a week.
View Articlehplog and temperature detection
Hi. I'm adding a temperature monitoring module to our system.Going through hplog man and over the web I couldn't find out what is hplog -t output when a high temperature is reached.Is the thermal...
View ArticleRe: ML350 Smart Array E200i The cache is temporarily disabled
spend $100 and get a refurb P410/512BBWC and all problems will go away. The E200i is a turd to be frank
View ArticleRe: Problem! Server ML350e gen8 08-HD Max sensor failed!
the new P420 firmware will clock down the raid controller cpu with 8 drives or less to solve the heat issue. Performance will drop down of course.Make sure all drive blanks are filled.P420 runs too hot...
View ArticleRe: Proliant ML 350 G6 P410i RAM cache with battery--Battery won't charge
i've had a cable fail, it was too long.suggest spend $100 on FBWC module and super cap .heck used you can get whole controller with supercap and have no more battery problems.
View ArticleRe: GEN8 Drives
The service part is right, be careful ebay folks are selling fake versions for $35 for SFF/LFF. They even sell the drive with them. I saw user selling 400GB SAS MLC HP SSD with SC for $450 and I even...
View ArticleDL380p Gen8 331FLR
We only use 2 of the Quad port 331FLR FlexLOM. Is there a possibility to disable the 2 not used NICs in the RBSU?I only see the option to disable the whole Quad port PCI device. We need this to get the...
View Articledl 165 g7 windows server 2012
Hi I have new dl 165 g7. I install windows server 2012 standard HP Rok version. In this paper dl 165 g7 is a tested server with ws 2012...
View ArticleRe: HPSUM fails download on cp018187.exe
Had the same problem on a ML350 G5 server. Downloading the file manually and placing it into the C:\Repository directory fixed the problem for me.
View ArticleRe: Can not update IO accelerator driver?
Hi All, This problem has been solved by using 'Let me Pick' and assigned a .inf file.
View ArticleRe: ProLiant Support Pack on Red Hat Linux 64
I'm experiencing exactly the same issues while trying to install HP SUM locally, the ldd results of the binary on the iso... I can't find the X86_64 version.Did you already find a solution for this?
View Article