Re: Update BIOS without direct access to USB
Hi, What is the operating system on this server?If Windows or Linux is installed, you can try the Online ROM Flash Component. Thank You!I am a HP employee.
View ArticleRe: which nvidia support for ProLiant ML310e Gen8
Hi, As far as I know, HP has not tested any Nvidia cards on this server model.You may check Nvidia Tesla GPU for servers.http://www.nvidia.com/object/tesla-servers.html You may have to choose by ML310e...
View ArticleRe: DL360 G6 Hang but not look like hang
Hi, This issue is not hardware or software but could be some configuration issue. Use notepad to edit the .rdp file and add the following:enablecredsspsupport:i:0 See the below...
View ArticleRe: Update BIOS without direct access to USB
It doesn't make sense to create an USB from the ISO and then create an ISO again from that USB. Why not using the ISO directly with vMedia?
View ArticleRe: Replacing failed SCSI HDD in HP Proliant DL360 with Smart Array 5i - RAID...
Hi BHR,Have you tried? I got the problem as you and no clue until now!Andy
View ArticleRe: HP ML350e Gen8 Fan Noise
Our issue was solved by HP swapping out the motherboard.I think it had settled down anyway as the day before I rebooted and decided to unplug the PSUs. Since that boot up (post NVRAM clearing and...
View ArticleUpdate hard drives in b110i
Hi, I have a ML110 G6 with B110i RAID 1, I've changed the two 250GB hard drives for two of 500GB. The problem is that it can't be expanded up to 500GB, 250GB only recognizes. Changing the hard disk was...
View ArticleRe: Update hard drives in b110i
http://h30499.www3.hp.com/t5/ProLiant-Servers-ML-DL-SL/ML110G6-extend-raid-on-b110i/td-p/5256852#.UgjBKD9u6LM see last reply
View ArticleRe: Update hard drives in b110i
Thanks Torsten,when creating the RAID 10 lose information?
View ArticleTurn on iLO | DL380p Gen8
Hello, Using F8 at startup i managed to turn off iLO on HP Proliant DL380p Gen8Now i need to turn iLO back onUsing F8 it is opening the ROM configuration utility.Can anyone help me please? Thanks
View ArticleRe: HP Proliant DL180 Server - Required SmartStart CD for HP Poroliant DL180
Hi, No Genration only its DL 180.. Thanks, Jugeshwar Mahto..
View ArticleRe: Turn on iLO | DL380p Gen8
You will need to remove the cover and set the iLO security disable switch to the on position. The sticker inside the cover will point out the switch
View ArticleRe: Turn on iLO | DL380p Gen8
Open the hood, look for a label on the back of the hood showing the location of switches. Flip the switch on the system board called "iLO security override" or something like that. Power ON the...
View ArticleP400 Stuck At Initializing during boot
I have a P400 SA controller that's getting stuck at the initializing during a boot. I reseated the card and it didn't help. How can I fix this? Thank you! -Kevin
View ArticleRe: P400 Stuck At Initializing during boot
Hi Kevin, Try the following. 1: reseat the cache module. 2: If there are no arrays already created then disconnect both sas cables & see if the card initialises. If it does the connect one cable...
View ArticleRe: PSP 9 install fails on SLES 11 x64 due to missing dependencies
Hi Steve, I am also having the same issue with a HP DL360p ... HP are telling me to revert to a sp1 which supports a 2.6.32 Kernel! Suse cant believe I have to go back this far.... This is a new...
View ArticleRe: HP ML350e Gen8 Fan Noise
Hi all, I was given a Beta BIOS but didn't solve my customer's problem. After applying the BIOS it states: P72 Bootleg (Fan Files) 12/35/2012
View ArticleRe: HP DL 165 G6 very noisy - fan speed
Has anyone seen a resolution to the DL 180 G6 fan problem? I found this thread after having the same fan speed issue. I run this at home in my utility room and its just way too loud so I looked at the...
View ArticleRe: DL380G7 WHEA-logger Event ID: 47 "A corrected hardware error has occurred"
Hello, The same error for me...A corrected hardware error has occurred.Component: MemoryError Source: Corrected Machine CheckThe details view of this entry contains further information. What is the...
View Article