Re: Array Controller P410i issue
after having disconnected SAS cable, got same error! cheers
View Articleunexpected Restart or nightly shutdown with blue screen
my server is (HP Proliant ml370 g5) with windows 2003 server Sp1 Operating system installed...it was stable until 2 weeks ago.The problem is: when the computer is running normally it makes unexpected...
View ArticleDL380p G8 opensuse 12.3 problem!!!
I m trying to install Opensuse 12.3. After a red screen solved qith firmware upgrade, nowthe install stars without problems but then it become black screen and no output.I tryied EDD=no, noacipi... but...
View ArticleRe: Proliant ML310e Gen8 making a LOT of noise!
Thanks for the response.iLo firmware is 1.22. Checked and updated everything that can be updated.Still running with the same 50% fan usage constantly.
View ArticleRe: DL380 G7 Backplane half flashing blue after FW update
Hi, This is a know (quite popular problem that was not fixed for years - apparently hp doesn't care about it):...
View ArticleRe: DL380p G8 opensuse 12.3 problem!!!
Had a similar issue with newer versions of fedora on a dl580 g7. They had included a more graphical installation interface and that was the problem for me. Seemed like there was some driver issue or...
View ArticleScripted offline hp sum firmware updates
Hello, I'm trying to set up an automated firmware deployment. The goal is to deploy firmware from a network share to easily add hotfixes etc. and to have logs and inventories for the single servers. I...
View ArticleALL Hard Drive swaping from DL 380 G3 to DL 380 G4
Hello, I have a question regaring the swapping of hard drives from DL 380 G3 to GL 380 G4.Would it be possible to pull out all the disk from G3 and put it on G4?The raid configurations are the same,...
View ArticleHP DL380 G7 - IO Accelerator Card(s) Issue
I have a customer that has several DL 380 G7's that are having issues with running fio-attach and fio-detach. They have replaced over 7 cards in the last few weeks and I am not convinced the cards are...
View ArticleAdding RAM to DL380 G7
My client has a DL380 G7 single CPU server with six 2Gb RAM modules (three banks of two each.) The current 12Gb of RAM is not sufficient and I need to upgrade to 32Gb. Can anyone tell me the best...
View ArticleRe: HP ProLiant Lights-Out 100 Remote Management software
Thx, but still don't know howto install LO 100?
View ArticleRe: HP DL380 G7 - IO Accelerator Card(s) Issue
Additional inforamtion: /var/log/messages has the following error during the fio-attach after approx. 45% status:kernel: fioerr HP 640GB MLC PCIe ioDrive for Proliant Servers 0000:0f:00.0: failed...
View ArticleRe: DL380 G7 Backplane half flashing blue after FW update
What iLO3 firmware do you have?
View ArticleRe: DL380 G7 Backplane half flashing blue after FW update
Can you please upgrade iLO3 to 1.57 or 1.61 and then run the backplane F/W 1.18C component again?
View ArticleRe: ALL Hard Drive swaping from DL 380 G3 to DL 380 G4
Hi, DL380 G3 has Smart Array 5i Plus Controller (integrated on system board).DL380 G4 has Smart Array 6i Controller (integrated on system board). First and most important thing is to take a backup...
View ArticleRe: DL380 G7 Backplane half flashing blue after FW update
Oscar you are a life saver, I updated to 1.57 then applied the backplane firmware again and it succeeded, I did end up with no light at all on half the drive but unplugging from power for a minute or...
View ArticleRe: Adding RAM to DL380 G7
Hi, DL380 G7 supports the following types of DIMM's, RDIMM, UDIMM and LVDIMM.Refer to DDR3 Memory Configuration Tool.Refer to HP ProLiant DL380 G7 Server - Configuring Memory. Refer to HP ProLiant G6...
View ArticleRe: DL380p G8 opensuse 12.3 problem!!!
I also used a text based install, but the problem was always present...
View ArticleRe: Proliant ML310e Gen8 making a LOT of noise!
Reseat the card and check if the issue is resolved. Also, reseat components such as other expansion cards, memory modules. Ensure that the third party card is of the correct dimension and PCIe...
View Article