Beware of the latest versions of HP Version Control Agent because of a...
Hello, Beware! The versions 7.2.0.0 (cp017734.exe) and 7.2.2.0 (cp020132.exe) of HP Version Control Agent for Windows x64 contain a critical bug which would result in random BSODs with an error 0xD1...
View ArticleClik here to view.
ML350p Gen8 Rack to Tower Conversion
Hello - I have seen several other threads on this but none addressed the issue our customer is having. They purchased the rack ML350p Gen8 chassis and wish to convert it to a tower. They obtained the...
View ArticleRe: Is there any way to add SSDs to my DL585 G2?
I recently installed a 60GB OCZ Vertex 2 SSD into the SAS backplane with no problems for use as a Solaris ZFS cache device into a DL585 G2/G6 (it really is a G2 but has been upgraded to 6-core Opteron...
View ArticleWeb NLB cluster between PROLIANT DL380 G6 and PROLIANT DL360P G8
Hi, It is possible te create a Web NLB cluster using PROLIANT DL380 G6 and PROLIANT DL360P G8? (2 nodes cluster). These are Windows 2008 R2 SP1-based servers. Thanks in advance!
View ArticleRe: hp proliant health check
Hi, You can using the iLO2 to checking the server hardware if you know it password. The DL360 G5 have a label at the top and on the front left side.. you can find the login name and password there....
View ArticleRe: Drives for Raid Configuration
Hi, HDD much same interface, if all is SAS, then you much replace it as SAS All is SATA of course much SATA too P.S. all of above is base on in same Logical Volumn.
View ArticleRe: Fan Noise on a DL380 G6 Server
Your HDD is not HP Brand? (HP Firmware, with HP label on the HDD etc?)
View ArticleRe: hp proliant health check
Will this show if the redundant power supply is enabled. can you also check if a hardware level password has been set from within this tool? Where exactly are we looking to ensure the latest SP has...
View ArticleRe: ML350p as a computing server
>... would the fact that HP does not sell a E5-2680v2 as a second CPU mean that the processor itself is not supported? Yes, it could mean that. Unfortunately, the easiest way to be sure would be to...
View ArticleRe: HP Dl380 G7 HP NC382i DP Multifunction Gigabit Server speed problem
Does anyone had the same problem, more additional info on windows 2008 R2 the same nic works without any problem at 1gb.
View ArticleRe: ML350p as a computing server
Thanks for the BIOS suggestion. The latest update (2013.09.18) actually mentions the E5-2680v2 in it's release notes: Addressed an issue where a system configured with Intel Xeon E5-2690 v2, E5-2680...
View ArticlePROLIANT DL385 G7 AND TEAMING NIC. NO INTERNET ACCESS.
HiI have aProliantDL385G7server with4NICteamingdoingandI cannot surf theinternet,or updateantivirus, butthe serverisvisiblefrom Internet andemailis working correctly.UsingSBS 200864bit,andnetwork...
View ArticleRe: Intelligent Provisioning and Win2012r2 error
Hi, which SPP did you use? Trouble running hpsum on 2012r2 (ML350pg8)
View ArticleRe: PROLIANT DL385 G7 AND TEAMING NIC. NO INTERNET ACCESS.
If all address data are correct, you should check if there is any kind of firewall/proxy that denies your access.
View ArticleHigh failure rate on ProLiant DL380p Gen8 / EG0300FBVFL SAS disk
Hi everyone, We have a pair for DL 380s and have seen a high percentage (60%) of disk failure for RAID1/5 arrays using SAS disks model EG0300FBVFL. After getting this escalated up to HP engineering...
View ArticleRe: PROLIANT DL385 G7 AND TEAMING NIC. NO INTERNET ACCESS.
Thanks for the reply. Windows Firewall is desactivated. AVG Firewall is not installed.I don´t understand. What happens??
View ArticleRe: PROLIANT DL385 G7 AND TEAMING NIC. NO INTERNET ACCESS.
A firewall outside this machine on your network?
View ArticleRe: Installing CentOS 6.3 to DL360e can't load driver for smart array controller
Hello,I 've the same problem with B320i controller. Any hint to solve the problem?Thanks for your support. Best Regards,EagleRed
View ArticleRe: PROLIANT DL385 G7 AND TEAMING NIC. NO INTERNET ACCESS.
Do not haveanyfirewall service. i don´t know what is the problem?
View ArticleRe: Intelligent Provisioning and Win2012r2 error
The regular SPPs won't work with R2. The supplimental SPP that came out the first week of November is what you want. Having said that, even with that package we had issues getting it to properly run....
View Article