HP Smart Array P410 Overheating
Hi, I have HP DL320 G6 with P410 array & 4 Nos. of 300GB 15K SAS HDD(RAID5). When I do the any OS (Linux or Windows) installation on same. P410 overheat during installation and after some time P410...
View ArticleRe: DL360 G4 refuses to power on. Fans work & no health light.
I have the same problem, anyone found a solution?
View ArticleRe: HP Smart Array P410 Overheating
Hi! How do you know it's overheating?Perhaps if you put it in a colder place.. :) If you have a BBWC to the P410 you could try to disconnect that and see if it works better.
View ArticleRe: Cache disabled on Smart array P410i
Hi,If you have the possibility you could just boot the server on the SPP (DVD or USB) and upgrade all the firmwareshttp://hp.com/go/spp
View ArticleProLiant DL360 G4 dont work LED CR21/CR22
Hi, after connecting the ProLiant DL360 G4 to run the current power supplies and cooling fans, nothing further happens. I'll need to run a second CPU cooling fans. On the motherboard LEDs blink 2 CR21...
View ArticleRe: Proliant BL45P G1, BL25P G1 and BL25P G2
Re-instaling 1.94 from web interface worked, but had to clear browser cache before making it to work.
View ArticleRe: HP Smart Array P410 Overheating
Hi, Thanks, When we touch the server at back side where we installed card it very hot. Also, back side of card also very hot. BBWC is not present. Thanks,Daxesh
View ArticleClik here to view.
Redundant power supply shows minor warning - ML350
We have an ML350 G6 with two power supplies, but one of them is showing as a fault of a kind the legend refers to as 'minor'. However, it reports that it is present, redundant and has no error, see the...
View ArticleRe: HP Smart Array P410 Overheating
You can use SPP to run diagnostics test on the server: http://hp.com/go/spp If your server is overheating, perhaps you should take care of that before trying to install an OS.
View ArticleRe: Installing CentOS 6.3 to DL360e can't load driver for smart array controller
gunzip the file on your client system and use iLO virtual Media to mount the driver image. If you don't have the advanced pack license for iLO, you can get a 30 day trail license so you can use the...
View ArticleRe: Cache disabled on Smart array P410i
Same error with me on a std. DL380G7 (P410i) ONLY with W2K3 versions. On W2K8 versions V6.40 works, but on W2K3 versions i use as a maximum V6.00. Did you pay attention to the remark Date XX/XX stamped...
View ArticleRe: Cache disabled on Smart array P410i
Hola, If you replace the battery, be 100% that it "click's" real good on the card. You have to push "as firmly as you can" untill you hear the "snap" sound. If not, the battery does not make good...
View ArticleRe: Cache disabled on Smart array P410i
i also have W2003, but why it doesnt work on 2003. Did you try to fix it? Cause when I downloaded the firmware from HP.com I chose it for 2003 server. I also heard that some firmwares may not correctly...
View ArticleB110i and Seagate Barracuda ES.2
Dear HP, I have a problem with all of my Seagate Barracuda's (ST3750330NS), the disks work fine when the sata controller is on AHCI. But when i change this to the onboard B110i all the drive leds trun...
View ArticleRe: B110i and Seagate Barracuda ES.2
Hi, HP Smart Array controllers can work better with HP Hard Drives, its because HP Drives have HP Firmware which works better with HP Controllers. Non-HP Drives may not work with HP Smart Array...
View ArticleRe: Redundant power supply shows minor warning - ML350
Hi, It could be either power supply itself or power supply backplane or the power cord.Take a look at this link for the spare parts.Part 13 is the Power Supply and Part 21 is the Power Supply...
View ArticleRe: ILO password
Hi, There is a iLO Trial License that you could try.Visit this link for more information. Thank You!I am a HP employee__________________________________________Was the post useful? Click on the white...
View ArticleRe: Cache disabled on Smart array P410i
The date stamped on the battery is the production Date. So in your case a new one should be: xx/13. On a lot of my DL380G7(P410i) the FW level was 5.14. Now were upgrading to 6.40 (or 6.00). Because...
View ArticleRe: DL380p Gen8 CPLD 31 only available for MS-Windows??
Do you have the latest version of the HP ProLiant iLO4 Management Controller Driver Package device driver installed? This is one of the prerequisite for a successful installation of the SPLD update...
View ArticleRe: DL380p Gen8 CPLD 31 only available for MS-Windows??
Hello Joern, I've got the newest 2013.09 installed, my ILO is 1.32. After I installed the CLPLD with the update utility in the ILO itself, its still giving me that error, when i try to run cp021330...
View Article