Re: DL380 G8 iLO4 issue
hi Torsten,It is v1.2.3.1591.Where can I get a more up-to-date version? I come from a Dell background, so struggling a bit to get grips with HP....Thanks again*** Found v1.3.1 - HPLOCONS 1.3.1
View ArticleRe: HP Smart Array E200 Firmware 1.86 Windows 2003 x86/x64 and/or 2008R2...
Hi,Could the 128MB BBWC memory be defective?Can yopu upload the ADU report.BR.
View ArticleRe: DL380 G8 iLO4 issue
Correct same system. I cannot reach iLO on IE because it is running old version 8....Via chrome (requires an extension to launch .NET applications) when I hit "launch" (.NET IRC) nothing happens
View ArticleGetting into iLO from Windows Server 2008 R2 Standard
Hi community,I am trying to setup and configure iLo on this server. I have tried going to System Management Homepage but the credentials I have dont seem to be working, is there a way to reset this? I...
View ArticleRe: Getting into iLO from Windows Server 2008 R2 Standard
You don't mention what server you are working with. If iLO is using a shared NIC port you cannot access it via a browser from the host system. You can install the HPONCFG utility to access and...
View ArticleHP DL360 Gen9 ILO4 is stuck during intelligent provisioning
Am trying to setup RAID on HP DL360 Gen9, using ILO4. When i use F10 Intelligent provisioning it shows show the HP logo and then gets stuck with a screen saying "Attempting to connect to HP Restful API...
View ArticleRe: HP DL360 Gen9 ILO4 is stuck during intelligent provisioning
any yellow sign in ILOs diagnostics page?
View ArticleHP dl380p upgrade
Hello everyoneI have an HP DL380p Gen8. could I install ethernet 40Gbps 2 Port Adapter on it? I find this model in specs sheet (HP Infiniband FDR/Ethernet 10Gb/40Gb 2-port 544FLR-QSFP Adapter), But I'm...
View ArticleRe: HP Smart Array E200 Firmware 1.86 Windows 2003 x86/x64 and/or 2008R2...
Hello Erdogan Temur,If that is the case I wouldn't even know how to validate or check that. In any case I've ordered a second hand used one since they are so cheap to buy. I'll update the firmware to...
View ArticleRe: Getting into iLO from Windows Server 2008 R2 Standard
Oh sorry, it is a ProLiant DL320e Gen8 v2. The nic ports are not shared.I've tried using that but I keep getting a .net error which is attached. I've tried reinstalling it but I get the same issue. If...
View ArticleAmber Light on Motherboard
Hi there, I have recently acquired a Proliant ML350 G6,I have a flashing amber light on the front panel, and a steady amber light on the motherboard. ive tried to find out what this amber light is, but...
View ArticleRe: ML150 G3 dual CPU does not boot
Glad to hear that you got it resolved.I removed the mainboard from the server last night, just to have the case ready when the new one arrives and i noticed that the part number of the mainboard is :...
View ArticleRe: HP DL360 Gen9 ILO4 is stuck during intelligent provisioning
No i don't see any yellow light. I have attached the diagnostics screenshot.
View ArticleRe: HP DL360 Gen9 ILO4 is stuck during intelligent provisioning
You could try to re-install IP, current version is 2.61:http://h20566.www2.hpe.com/hpsc/swd/public/detail?sp4ts.oid=7271242&swItemId=MTX_77b94511492441a08eb272ed27&swEnvOid=4138
View ArticleHP Smart Array P800 Controller
I have an old HP ProLiant DL185 G5 Storage Server with twelve large form factor (LFF) 3.5" drive bays and HP Smart Array P800/512MB Controller with dual battery-backed write cache (BBWC), which I like...
View ArticleRe: HP Smart Array P800 Controller
Hi,Max. 1TB Support.8.0TB (8 x 1TB Hot Plug 3.5" SATA hard drives)8.0TB (8 x 1TB Hot Plug 3.5" SAS hard drives)Given the increasing need for high performance and rapid capacity expansion, the SA-P800...
View ArticleRe: HP Smart Array P800 Controller
NOTE: Support for greater than 2TB in a single logical drive, does this mean that I can install 12 enterprise drives of 10TB each
View ArticleRe: Amber Light on Motherboard
Hi,Could you attach a picture of the led on the motherboard.
View Article