Quantcast
Channel: All ProLiant Servers (ML,DL,SL) posts
Browsing all 30225 articles
Browse latest View live

I'm trying to add a 2Tb sas drive to my ML310 G5 with P400 256mb raid controller

Hi, I'm trying to install the following 2tb hard drive in my old ML310 G5 server to help upgrade it and get more life from it. It's the HP MB2000FAMYV 2TB 7.2K SAS 3.5" drive which has an additional...

View Article


Re: I'm trying to add a 2Tb sas drive to my ML310 G5 with P400 256mb raid...

Just to add one further thing the P400 card has been upgraded to the latest firmware.Thanks.

View Article


Re: HP ProLiant ML350 G5 with E200i array controller and EG0900FBLSK drives

Hi Ilagi, did this ever get resolved? I have a similar problem trying to add a 2Tb hard drive to a P400 controller in my ML310 G5 server.ThanksPhil.

View Article

Re: I'm trying to add a 2Tb sas drive to my ML310 G5 with P400 256mb raid...

Hi! " Bios reports no hard drive found and moves on." If you go into ORCA or boot the server on SPP can you see the disk to add it to an array and create a logical volume?

View Article

Re: I'm trying to add a 2Tb sas drive to my ML310 G5 with P400 256mb raid...

Hi Johan, I don't understand what is ORCA or SPP?Thanks for your replyPhil.

View Article


Re: I'm trying to add a 2Tb sas drive to my ML310 G5 with P400 256mb raid...

SPP: www.hp.com/go/spp/download Is a bootable ISO that you can burn to a DVD or add on a USB stick.Within ACU (HP Array Configuration Utility) inside SPP you can take the disk you've added and add into...

View Article

Re: I'm trying to add a 2Tb sas drive to my ML310 G5 with P400 256mb raid...

Hi Johan, I can try the SPP, however there is no prompt to press F8 as the controller can't see and initialise the disk. I did get the F8 prompt when I placed a 250gb sata drive in one of the bays as...

View Article

Re: DL380-G6 overtemperature led

Bypassing a sensor would be a bad idea.   If you cannot just replace the system board and really want to repair it, look for the SMSC EMC14xx chips on the board and check each of the remote diode...

View Article


Adding second processor

Hi,I added a second processor to a new HP DL380p Gen8 server along with the appropriate RAM but when I turn the server on it only recognizes the 1st processor and memory.  The proc is properly seated...

View Article


Re: Adding second processor

You didn't say if second processor was purchased from HP. I'm guessing not. I would first check existing processor specs, type, speed, step, cache, etc. Then check new one for same. Sometimes a CPU...

View Article

Re: Adding second processor

Thanks for answering.  Yes, it was purchased from HP through a vendor at the same time as the server was purchased but it just didn't come installed in the server.  I will try and swap CPUs to see if...

View Article

Re: Questions about new DL360p Gen8

I understand that, and I am aware. Thank you. But I'm curious if the Gen8s are supposed to have the iLo tag attached to the power supplies like all the previous DL360's had.

View Article

HP Prolient DL360 G5 Server 2012

Hi, I have installed Server 2012 on a DL360 G5 server and all is good except I can't find a driver for the "IPMI Interface". I belive this is to do with the ILO, which seems to work ok. Does anyone...

View Article


Re: Questions about new DL360p Gen8

Nope, no more toe tags. All Gen8 systems have the slide out tab containing the info  

View Article

Re: DL380p Gen8 DVD blank removal

Two screws and the whole assembly slides out. A long screw driver should pop the blank right out, or at least it has on the ones I've messed with. Push on the tab on either end of the blank

View Article


Re: Questions about new DL360p Gen8

Thanks Jimmy! I just wanted to make sure no one removed it from the server before I purchased it!

View Article

Re: Changing Proliant Serial Numbers

PM Sent, but I think you will need to reboot for the change to appear

View Article


Re: I'm trying to add a 2Tb sas drive to my ML310 G5 with P400 256mb raid...

I agree. SPP won't help much, unless you need to upgrade firmware on the System BIOS. Just to clarify: A 250GB SATA disks is found in a slot where the 2TB disk is not? Which HP product / spare part...

View Article

Re: I'm trying to add a 2Tb sas drive to my ML310 G5 with P400 256mb raid...

There are several, 507613-002, a sticker added with 507616R-B21, and another with 507618-003. The drive has model MB2000FAMYV number on it. It's basically a re-badged Seagate drive as it has the ref...

View Article

Re: DL380-G6 overtemperature led

i found the SMSC chipset, but the code is SCH4307-NS. any ideas where diode is? i only find this one: http://serverfault.com/questions/514330/hp-dl380-g6-where-is-temperature-sensor-30-i-o-board-zone

View Article
Browsing all 30225 articles
Browse latest View live


<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>