Error 24606
Customer keep getting Source: Cissesrv Event ID:24606 after replacing a bad Harddrive for past month. Event log has Logical drive 1 of array controller P410i [Embedded] returned a fatal error during a...
View ArticleDual power supplies, dual voltage
I have a DL360p with dual power supplies. What would happen if I plugged one of the power supplies into a 220V outlet and the other into 110V? I'm thinking it'd be fine, assuming the power switching...
View ArticleProliant DL380e Gen8 Uncorrectable Machine Check Exception
Hello, I'm currently having a hard time troubleshooting the root cause of a random and frequent reboot on a Proliant DL380e Gen8 server. The errors given by the Integrated Management Log are the...
View ArticleML115 has died
Our Proliant ML115 has been running well for a few years. Today it suddenly died. At one stage there was a message on the screen about 'BMC not responding', but now it doesn't even get as far as the...
View ArticleRe: Proliant DL380e Gen8 Uncorrectable Machine Check Exception
It could be a bad processor. Did you run HPDiags ?
View ArticleRe: Error while updating the drive size in Hp Proliant DL 320 using Automated...
Hi, This looks like a XML file error message.For example look into this link and this link. Have you tried with a different version of Automated Storage Manager? Thank You!I am a HP employee.
View ArticleRe: Error while updating the drive size in Hp Proliant DL 320 using Automated...
Thanks for reply! Could you please inform which ASM version need to install? (Please post the link to downlaod the ASM version). If i have to revert back to current version which files of ASM I have to...
View ArticleRe: HP SUM 6.0.1 issue upgrading System ROM : Node up to date. No applicable...
I think you need a different baseline: http://h17007.www1.hp.com/us/en/enterprise/servers/products/service_pack/spp/index.aspx open OS Supplements
View ArticleRe: 1797-Slot 0 Drive Array - Array Accelerator Read Error Occured
Hi, The FW version of controller is 7.24.
View ArticleRe: 1797-Slot 0 Drive Array - Array Accelerator Read Error Occured
If fw is current (it is) and the other components are already replaced, the controller itself could be bad.
View ArticleRe: ML370 G5 64gb memory won't boot
Same problem for me when Idirectlystartedto move to32GB to 64GB.Requireto install 16Gb (4x4Gb) per 16GBto startnormally. Thank you for thepostthat helpedme to solvemy problem.
View ArticleRe: Proliant DL380e Gen8 Uncorrectable Machine Check Exception
Could both processors be bad ? Or maybe one of them could impact the other ? If by HPdiags you mean launching the hpdiag tool while booted on the OS, then the answer is no, I've only launched Offline...
View ArticleRIBCL syntax for Storage information of Gen8 server
Hi, I am confused about using RIBCL to get server information. When I use iLO 4 web interface (firmware version 1.30), I can get Storage Information (section Server information) with two types of view:...
View ArticleRe: Proliant DL380e Gen8 Uncorrectable Machine Check Exception
AFAIR there can be a "bad" BIOS setting - check the advisories, please.
View ArticleSplit mirror without removing either hard drive
I have a ML350 G6 server that i would like to split the array on for recovery purposes (Planning risky upgrade). The server has a single RAID 1 mirror and the integrated 410i controller. I have no...
View ArticleRe: Problems with Proliant DL560 Gen 8
Ok, after 2 days of waiting, HP's answer (like it always is) was to update the BIOS firmware(s) with the latest SPP and clear the NV RAM (AGAIN). Kind of frustrating, because that exactly what they...
View ArticleRe: 1797-Slot 0 Drive Array - Array Accelerator Read Error Occured
I'm asking because acc. to this advisory, the issue has been corrected in Smart Array Controller Firmware Version 3.66 (or later): http://sawpro.atlanta.hp.com/km/saw/view.do?docId=emr_na-c02666681 but...
View ArticleRe: Problems with Proliant DL560 Gen 8
>> HP's answer (like it always is) was to update the BIOS firmware(s) with the latest SPPIn general it could be better to check the web for more current (and maybe fixed) firmware then the...
View ArticleRe: Proliant ML350 Gen6 with P410i controller - cannot migrate to RAID 1+0
I'm experimenting with an array migration myself, so I had just read through the documentation and two things came to mind. The documentation says : "Only RAID levels that are possible for this...
View Article