Re: Need advice PLz
HelloAs always, "it depends" is the answer. It depends on your desired performance requirements and needed capacity. RAID10 will give you the best performance and (possibly) greater risk avoidance from...
View ArticleRe: ML350 Gen9 Second Cage
Hi,Thanks for the quick response. I had ordered an expansion card but i think it was the wrong part as for a DL380 Gen9 (which doesnt work) have ordered the one for the ML350 Gen9 now to try...
View ArticleRe: ML350 Gen9 Second Cage
OK, if you've already ordered the expander then please post your results. My understanding is that there are no technical concerns with using the expander on P440ar but that there may be some tight...
View ArticleRe: HELP DL380 G5 RAID array lost due to two failed hard drives
I wouldn't say that it's "unrecoverable" as I've probably recovered a hundred RAID 5 arrays with two failed disks. Un-rebuildable via the RAID controller, yes.What will need to be done is:At least one...
View Articlerestauration windows 2012 dl180 gen9
Bonjour,lorsque je veux restaurer Windows sur un serveur hp dl180g9 à l'aide de la restauration Windows, le système Windows ne détecte pas mon volume RAID pour procéder à la restauration.l'utilitaire...
View ArticleRe: Server 1709 (Server 2016 Fast Track) on BL460c Gen9
I'm also unable to setup 1709. Tried 3 different Gen9 models, including BL460c. Setup hangs after "Loading files" screen. No BSD and no error, just silent ... nothing.
View ArticleRe: Server 1709 (Server 2016 Fast Track) on BL460c Gen9
I'm also unable to setup 1709. Tried 3 different Gen9 models, including BL460c. Setup hangs after "Loading files" screen. No BSD and no error, just silent ... nothing.
View ArticleRAID LEVEL MIGRATION (RAID 0 to RAID 5) - ML350 Smart Array P410 RAID Controller
hello evryonei have a ML350 Smart Array B410 RAID Controller 512MB FBWC write cache module is installed.with two SAS hard drive set up in RAID 1 , the ACU doen't give me the choice of raid 5...
View ArticleRe: HELP DL380 G5 RAID array lost due to two failed hard drives
That is what I eneded up doing, the manager told me to take it to a professional and so i did. They have them now but they told me of the two bad HDs one had bad sectors and the other had mechanical...
View ArticleRe: HELP DL380 G5 RAID array lost due to two failed hard drives
I am located in Dubai and the place I took it to was Data Angle, they quoted 1200 usd so I guess that is not too much based on your info. That is good to knowhttp://www.angeldatarecovery.com/contact-us/
View Articleproliant ml110 g5
I have added 4 x 2TB hard drives created a array, but the array is only seeing 2TB. Does this need a firmware or bios update?I have read the specs and its says I can use 4x2TB
View ArticleRe: HP DL 380 G9 Partition restores itself
What i forgot to mention is that we have a battery backed write back cache.Does anyone have had similar issues and thought about getting crazy ?I mean it is one of the basic operations an admin has.
View ArticleRe: proliant ml110 g5
Where are you only seeing 2TB? You said you created the array, how big does the array controller management utility say that the logical disk is? Did you put all four disks in a RAID5?
View ArticleRe: RAID LEVEL MIGRATION (RAID 0 to RAID 5) - ML350 Smart Array P410 RAID...
with only two drives in the array you, of course, cannot migrate to RAID5. Have you added the new drives to the existing array and then tried the migration? See...
View ArticleRe: Running hplog and asmcli got Could not open /dev/cpqhealth/cdt on CentOS7...
Did you get this working? I am having the same issue w/ a CentOS 7.,4 based OS.
View ArticleRe: Intelligent Provisioning error PROLIANT ml10 gen9 server
Hi, where do you found the download link?
View ArticlePatching Servers - iLO version, BIOS Version etc
Hi, we have some ProLiant DL360 Gen9 servers that have recently replaced our older fleet. We are looking to introduce regular patching/updating of BIOS/iLO version etc, we are running VMWare 6.5 on...
View ArticleRe: IPMI/DCMI over LAN in iLO 5
Hi,Current verison of our HPE iLOCmdlets (1.5.0.0) does not support Gen 10 servers but the new version 2.0 which is under development is going to support Gen 10 by end of Q1 CY18.Thanks,GokulHPE...
View Article