Re: DL380 G5 updates refurb unit
You will need the Proliant "Smart Update" CD/DVD Version 8.70 to 10.10. It makes no sense to look for newer versions because the G5 is quite old.You can find it here:...
View ArticleRe: Sudden self-shutdown of our HPE DL380 gen8 server
Sounds familiar to me. I think we fixed it with a firmware (BIOS) update. Google for "unexpected shutdown HP DL380 G8" I'm not sure if we needed a special update for this issue.
View ArticleHP DL385 G7 RAM Population Question
If I have 2 CPUs and 2 sticks of RAM is it OK to put each stick in slot#1 on each controller?
View ArticleDL385 Can It Boot With CPU#2 Only?
CPU Socket#1 has a bent pin or two and I cannot bend it back. I believe this is why it will not post. Is it possible to boot from CPU#2 only?
View ArticleHP DL385 Won't Post
Hi guys this is not my machine but I've been tasked with troubleshooting it. I was told it had no RAM or CPUs (or maybe 1 CPU). In hindight I wish I had tried to just boot and post it with just the...
View ArticleRe: Fake hard disk frames for Gen8-Gen10?
HPE does not offer the hot-plug drive caddies as an option part. Anything you find out in the wild is either a counterfeit, or a used one removed from an HPE spec'd drive.
View ArticleRe: Upgrading CPUs on a DL585 G2
What bios version are you running the hexagons on? I currently have version 2.10 is that the latest?
View ArticleRe: HP DL385 G7 RAM Population Question
HelloYou must populate your RAM in a specific order.You can find the information in this two linkThe first is for the dl385 G7 https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-c02188057The...
View ArticleHP DL380 G9 + Nvidia 1080 GTX Ti ?
Can any Nvidia 1080 GTX Ti ( 11GB) be installed on HP DL380 G9 ? If not. Is any other Deep Learning accerlating card recommended?
View ArticleRe: smart Array P410i in Embedded Slot error
Hello.I have replaced the cache module batteries with new original batteries, made firmware upgrade on Smart Array P410i controller to version 6.64 (previsous was 6.0), made BIOS upgrade on server...
View ArticleRe: Cache Disabled Low Batteries
Hello.I have replaced the cache module batteries with new original batteries, made firmware upgrade on Smart Array P410i controller to version 6.64 (previsous was 6.0), made BIOS upgrade on server...
View ArticleRe: P400: Battery/Capacitor Status: Failed
Hello.I have replaced the cache module batteries with new original batteries, made firmware upgrade on Smart Array P410i controller to version 6.64 (previsous was 6.0), made BIOS upgrade on server...
View ArticleRe: DL380e Gen8 support 726821-B21 Smart array ?
Hi,You may check the following document links for this...
View ArticleRe: HP PROLIANT ML 350 G6 BLINKING RED ON THE FRONT LED PANEL
There are no errors when I power it off and on the at times i see amber leds when i open the lid.What could be the issue here in such a case?
View ArticleRe: HP PROLIANT ML 350 G6 BLINKING RED ON THE FRONT LED PANEL
Im able to log in th server but when i run diagnostics with the smart start cd everything seems okay.What coul be the issues?
View ArticleRe: HP PROLIANT ML 350 G6 BLINKING RED ON THE FRONT LED PANEL
You say you see yellow LEDs when you open the lid... What lid? The front door or the top(side) cover? Do you mean LEDs on the mainboard?If the LED os on the mainboard ther is normally a text next to it...
View ArticleRe: HP PROLIANT ML 350 G6 BLINKING RED ON THE FRONT LED PANEL
The leds are inside the on the mainboard.Regards Samson
View ArticleFake hard disk frames for Gen8-Gen10?
We did some experimenting lately... I was wondering if a non-HPE SSD drive would work in a brandnew Gen10 server (DL380). I assembled the drive with the frame that was supplied, plugged it into the...
View ArticleRe: DL385 Can It Boot With CPU#2 Only?
Better keep your issue in a single thread. No, it won't boot.
View ArticleRe: DL360 G7 fan surging
Hi,Though I am not sure about G7 server. However, I have got few Gen8 and Gen9 servers documents related with Fan...
View Article