Re: Can not login with default username and password (from sticker) in iLO4
You can log in to iLO configuration utility by pressing F8 from console after reboot.It is possible to define new password for iLO Administrator account this way.BR, Oleg.
View ArticleRe: VmWARE Esxi 5.5 cannot detect Hard Disk DL320 G8 v2
Try to use HP customized ESXi images for ProLianthttp://h18004.www1.hp.com/products/servers/software/vmware/esxi-image.htmlThis problem occurred may be because you have Dynamic Smart Array B120iBut...
View ArticleRe: Blue screen
A new version was released to the web which includes W2K12 R2 support (62.8.0.64)
View ArticleILO4 Firmware 1.32 and Windows OS Install Errors
Hopefully this helps save someone some grief out there... We just got a brand new batch of Gen8s running ILO4 (mix of DL385p and BL465c). All came with ILO4 Firmware 1.32. When trying to load Windows...
View ArticleRe: DL360 g5 PCI express version
am I incorrect in saying that these are backwards compatible and the 2.0 will work but there is a difference in the bandwidth that the slot can provide?
View ArticleRe: ILO4 Firmware 1.32 and Windows OS Install Errors
That message is related to Windows installed not detecting or loading correct driver for the Embedded Smart Array controller in Gen8.Have you tried using Intelligent Provisioning to deploy Windows 2012...
View ArticleProLiant DL785 G5 Firmware Update
Hi all, I am an intern at a local Integrated data and telecommunications company and am new to the server side of IT. I know some basic knowledge still being in college, but my knowledge is limited....
View ArticleRe: ILO4 Firmware 1.32 and Windows OS Install Errors
That's what I originally thought too, that the system wasn't seeing the Array Controller for any of the systems. We did try loading drivers to no avail. It would always kick back that error. The bad...
View ArticleRe: ILO4 Firmware 1.32 and Windows OS Install Errors
I just tried booting from Windows 2012 R2 ISO and I saw the same issue. I know what is going on. It is related to code we recently added to iLO2, iLO3 and iLO4 firmware to workaround a problem with...
View ArticleRe: ILO4 Firmware 1.32 and Windows OS Install Errors
Thanks so much for following up Oscar. I really appreciate it. Good to know that I'm not completely crazy :-)
View ArticleRe: Can not login with default username and password (from sticker) in iLO4
Are you using an upper case A in Administrator? - yes, you are right @It is possible to define new password for iLO Administrator account this way.@ - today i will change password and try to login...
View ArticleRe: CentOS 6.5 and dL380 G5 boot problem
Sounds like the GRUB bootloader might be confused about which disk it should be booting from, or the installer might have put the GRUB boot record in the wrong place. Boot to rescue mode, and check out...
View ArticleProblem with hard disk
I have Hp proliant DL380 G5, I found one of the hard disks with red light, then it turned off. The problem that now the (D:) does not appear anymore, with all my data in it. I turned off the server and...
View ArticleRe: Max hard drive sizes for ML350 G3 server with Smart Array 641 controller?
Thanks for the info. I ordered the needed parts, so we'll see how things turn out.
View ArticleUpdate drive firmware outside Proliant?
I've adopted a retired, HP-branded 3.5" SAS Drive (DF300A4950, Hitachi made) for desktop use. I know this is a long shot, but... is there a way to update the drive's firmware from its present revision...
View ArticleRe: HP DL1000 multi node server BIOS POST message: Can't detect NODE ID
Sorry...just saw this now....It boots to OS sometimes, but reboots itself within a few minutes or sometimes before even getting to login prompt. We get this message on all 4 nodes in the box. We did...
View ArticleRe: CentOS 6.5 and dL380 G5 boot problem
^ Exactly my thoughts, this happened to me with RHEL. There's some emerging Linux tech for naming NICs and disks according to internal/external/PCI slots that holds great promise. Yeah you can do some...
View ArticleILO access - ML110, SBS2011, dual nics
I'm trying to get access to the iLO port on a server (remotely) but can't get access to it unless I enable the adapter within Windows. I don't want to enable this as the other nic is already set up to...
View ArticleRe: CentOS 6.5 and dL380 G5 boot problem
> There's some emerging Linux tech for naming NICs and disks according to internal/external/PCI slots that holds great promise. Yes, but since the CPU cannot just grow legs, hop out of its socket...
View Article