Re: ILO issue
If I reset the ILO from ILO web browser is there any chance that the ilo configuration like ip,user id,password get changed ?
View ArticleHP Proliant ML310e Gen8 V2 won't boot but has solid orange LED
Pliease help. My HP Proliant ML310e Gen8 v2 has the following config;8GB HP verified RAM, 1TB HP Hdd, and no additional cards or hardware. It was working well and suddenly it shut down and no LEDs were...
View ArticleSmart Storage Battery Failed
I have replaced a smart storage battery and the new battery is showing as failed. I'm finding the whole smart storagte battery experience a little like being lost in a dark forest with a torch with no...
View ArticleNew ML150 Gen9. Strange problem. Please help!
I bougth this server 2 months ago. I boot unRAID from one of the internal USBs and used 2x10T 3.5" HDDs and 1x 512G SSD in three of the four cage bays. It worked without any problems. I wanted to add...
View ArticleRe: New ML150 Gen9. Strange problem. Please help!
There is the possibility that there is something wrong with this 2nd SSD, but that wouldnt be my first guess. If you reset NVRAM using SW6 on the system board will the other drives show up again?
View ArticleRe: New ML150 Gen9. Strange problem. Please help!
Thank you for helping me out.I think nothing is wrong with the 2nd SSD because if I remove everything, then insert just two SSDs, both are detected perfectly. If I insert 2x 3.5" and 2x SSD, just the...
View ArticleOriginal Server System Configuration
Hello, is there any way that I can type in my serial number for a particular server and see a list of the original hardware configuration and have the option to download only the drivers that I...
View ArticleRe: Update hard drive firmware on ProLiant ML350 G6
krasinka1409 Thank you for responding. I understand about not offering reasurance of not data loss. Perhaps I should've said please help with best practice proceedure. I should be ablet to updtate the...
View ArticleRe: Update hard drive firmware on ProLiant ML350 G6
I've got the BIOS and the HDD updates. I'm a bit confused on what Storage Controller update to use. Its a Smart Array P410i Controller. The current driver is hpciss2.sys (6.26.0.64). Could this one be...
View ArticleRe: Smart Storage Battery Failed
Are iLo4, Smart Array controller and SystemROM (this one clearly not considering what you wrote about) updated?
View ArticleRe: HP Proliant ML10 Gen9 Drivers Server 2016
Oh, sorry. I wasn't really aware of ML-servers that are not supported by the SPP.But yeah, Microsoft do deliver some good drivers trough Windows Update since W10/2016. I wonder if you mis out on some...
View ArticleOffline SSA 2.65 is not booting on DL380 G7 server
Dear all, I am having issue with HP prolinat server DL380 Gen7 , Raid card P410i, I have downloaded "ssaoffline-2.65-7.0" and burn ISO file to a cd , but when I am trying to boot from the cd it's not...
View ArticleRe: New ML150 Gen9. Strange problem. Please help!
It seems this problem will go unsolved.Better RMA then.
View ArticleRe: Offline SSA 2.65 is not booting on DL380 G7 server
Finally I could reboot from the drive, now my issue with this version it doesnot show install OS and when I finish the configration as I want I exit from SSA CD and boot with Win svr DVD , no change...
View ArticleRe: Smart Storage Battery Failed
Hi,There are a couple of knowledge base articles and advisories available on our portal, do check them.You may try updating the iLO and Smart Array Controller firmware to the latest available.Thank...
View ArticleRe: ML110 G5 + X8 videocard
Hi,1. Is this video card compatible with this server?2. Is this video card getting enough power from the PCI slots to work?These are the main factors that might affect the video card...
View ArticleRe: Spectre and Meltdown latest info
Hi Vajith,we have 2 ProLiant DL160 G6 and are waiting for a Bios Update. Any progress on this so far? Is there going to be an update any time soon?Best Regards,Ben
View ArticleRe: Original Server System Configuration
Hi,Try partsurfer.hpe.com and key in the serial number.Thank You!I am a HPE employee_________________________________________Was the post useful? Click on the white KUDOS! Thumb below. Kudos is a way...
View ArticleRe: Smart Storage Battery Failed
Thank you, this helps a lot.Seeing the expired versions of spare parts helps me understand my different serial numbers.I will update the system rom and see if the battery stops showing as failed. Chris
View ArticleRe: What is the function of the UID LED and switch?
Hiiii,This is ankit Patel,Q:- What is the function of the UID LED and switch?If you can not find right server on phisycal so You can on UID light from ILO service also through web,find below screen...
View Article