Thanks.
I'd like to say that the b120i is a poorly designed card then. Allows RAID 10 but only at half the transfer speed of modern drives....
↧
Re: HDD showing wrong transfer speeds
↧
Re: HPE Smart Storage Battery for HPE Proliant Gen9 Servers
These 96w new batteries support 24 devices, ok? At least this is reported in quickspecs.
But, what does "devices" means in this information? (1)
Well, I think it's all about marketing techniques.
↧
↧
Enable intel virtualization from command line on HPE server
how to enable intel virtualization from command line - ssh
↧
Bootable USB
I have a ProLiant ML10 Gen9 and i want to create a bootable USB using rufus but unable to complete the process. It says processing failed. What am i doing wrong. Anyone has any guide or step by instructions on how to create bootable using Rufus. please help
↧
Re: Bootable USB
Hi,
Can you please share the error snap ?
Regards,
Sudhir
↧
↧
Re: Bootable USB
Unable to add image to the post. It says ISO image extraction failure. What are the different recommended ways to create bootable for similar servers?
↧
Re: Bootable USB
Hi,
I have used SPP image to make USB bootable with following settings and it works for me,
Check if that helps,
Run Rufus as an administrator,
Device: choose your USB device <I have tried with 32GB USB drive from scandisk>
Boot selection: Select ISO
Partition Scheme: MBR
Target:BIOS or Uefi
Filesystem: Fat32
Cluster size: default(16K)
Or
You can try HPE USB Key Utility,
https://support.hpe.com/hpsc/swd/public/detail?swItemId=MTX_360731071b404454b454390208#tab-history
or
Unetbootin
http://unetbootin.sourceforge.net/
Hope this helps,
If you feel this was helpful please click the KUDOS! thumb below!
Regards,
Sudhir
↧
Re: Enable intel virtualization from command line on HPE server
Hello,
Which model of server you are talking about?
From where you want to enable Intel -VT ? Are you talking about from ILO command line or from OS.
Please clarify the same.
Thanks,
↧
Re: Bootable USB
Hi,
Are you trying to make windows ISO image to USB Bootable and getting this error " ISO image extraction failure" ?
Try following
Extract the image, (use 7zip/winrar),
Navigate to the folder and delete autorun file (possibly readonly) ,
Use isocreate tool or any similar tool to make ISO image by selecting the extracted folder.
Now use the rufus again with this image,
Hope this helps.
If you feel this was helpful please click the KUDOS! thumb below!
Regards,
Sudhir
↧
↧
Re: Bootable USB
Yes, that is what i am trying to do..I'll try your steps and will update you. Thank you for your help
↧
Re: Buffer failure during boot. Proliant G9/VMware 6.7
Hi,
Do you see any "Unsupported configuration" or corrput meta-data for SD card slot 1 or 2 in IML events,
Login to ILO console and check Integrated Management logs event.
In my experience , have seen this issue with one of the SD card and and it failed to sync and eventuallty os failed to boot,
replacing suspected SD card has solved.
Hope this helps!
Regards,
Sudhir
↧
Firmware Downgrade Options
Hello,
When you try to downgrade a firmware using SUM you get the following options:
- Downgrade Firmware & Software
- Downgrade & Rewrite Firmware & Software
What is the difference between downgrade and rewrite?
What is meant by software here?
Thanks
↧
Re: Firmware Downgrade Options
Hello ,
What is the difference between downgrade and rewrite?
Downgrade means : Lower version from the current version installed
Rewrite means : Overwrite the firmware
Software means: There are so many software listed in the proliant server. That is why they have mentioned software.
Thanks
↧
↧
Re: Firmware Downgrade Options
Hi,
Software refers to : Drivers, HPE Utilities and HPE Agents that was included in the SPP Package.
For more Installation Options, please refer to : https://support.hpe.com/hpesc/public/docDisplay?docLocale=en_US&docId=emr_na-c05391924
Thank you
↧
Re: Firmware Downgrade Options
Hello
Thanks for your reply,
Could you please be more detailed?
thanks
↧
Re: Firmware Downgrade Options
Hello,
The term 'software' in SUM (or SPP) refers to HPE Softwares, which are the utilities and applications released by HPE. These are released to enable specific functionalities, for example: the Smart Storage Administrator for the RAID Controllers OR SMH that provides users to be able to monitor the server from the host OS.
Regards,
Vador
↧
Re: Firmware Downgrade Options
Hello,
Thanks for your interest to know more on this. Please refer below for more info.
https://support.hpe.com/hpesc/public/docDisplay?docId=c03927812
Thanks,
↧
↧
Re: Firmware Downgrade Options
Hi
Downgrade will allow you to downgrade the firmware/software from the Higer Version to lower versions.
Whereas Rewrite will allow you to upgrade/downgrade the firmware/software even if the server has same version is in the package. (Eg: If a component is already at v2.33 and if the SPP package has v2.33, it will rewrite this again on the component)
Regards,
↧
Re: HPE Smart Storage Battery for HPE Proliant Gen9 Servers
Hello,
The 'devices' there means the Smart Array Controllers and NVDIMM's. It means that the 96W Smart Storage Battery supports 24 of those 'devices'. The quickspecs for the Smart Storage Battery also confirms this. It is a combination of Smart Array Controllers and NVDIMM's, that cannot exceed the count of 24, is what that statement is referring to.
While we know about the requirement of the Battery for the Smart Array Controllers, the HPE Gen9 servers have support for NVDIMM's as well which also need battery backup for their functionality. These are 8GB NVDIMM's and on a standard 24 DIMM Slot Systemboard, we can support a max of 16 NVDIMM's.
From the monitoring ability, the iLO is capable of monitoring the Battery and display its status as well. While it does not show the number of 'loads' connected, it provides an ability to monitor it without any OS dependency.
Regards,
Vador
↧
Re: Bootable USB
For creating a bootable USB device from a SPP you should only use the included USBKey utility.
There are config files included in the ISO that are used to create a bootable device.
↧