ML110 G___?
This information would be important.
↧
Re: Remote BIOS passwords reset
↧
Re: HP SMH - Temperature Sensors missing
Is the agentless driver installed?
Can you see all information correct in ILO web page?
↧
↧
Re: Remote BIOS passwords reset
ML110 G7, sorry.
Thank you!
↧
ML150G5
hello, i need to disable the network card on board ML150G5 Proliant Server, but can not find the option in the Setup
↧
PowerShell HP BIOS Cmdlets failed to Connect-HPBIOS
Hi All HP Gurus,
I am so happy that HP release PowerShell module HP BIOS Cmdlets becuase it seems to be very helpful a lot for my datacenter automation planned.
I downloaded and install HPBIOSCmdlets-x64.msi with all prerequisites follow instructions on :
Unfortunately, I cannot get it to works. I have got errors everytime when use Connect-HPBIOS command. I alway get this...
PS C:\> Connect-HPBIOS -IP 10.123.123.123 -Username MyiLOUser-Password MyPasswordConnect-HPBIOS : Failed for 10.123.123.123:Make sure iLO VSP and WinPE EMS is correctly set. You can use New-HPBIOSCustomWinPEImage to create a custom WinPE image that can check and update the iLO VSP and WinPE EMS settings. At line:1 char:1 + Connect-HPBIOS -IP 10.123.123.123 -Username MyiLOUser-Password MyPassword + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : InvalidOperation: (:) [Connect-HPBIOS], HPBIOSException + FullyQualifiedErrorId : HPBIOSCmdlets.ConnectHPBIOS
Can anyone help me to resolve this problem?
It's seems like some bugs on loading this HPBIOS PS module.
Thanks in Advance,
Jobbo
↧
↧
Re: Remote BIOS passwords reset
IMHO the only way is to reset the system via System maintenance switch.
...
When the system maintenance switch position 6 is set to the On position, the system is prepared to erase all
system configuration settings from both CMOS and NVRAM.
↧
Re: Remote BIOS passwords reset
As I feared, thank you Torsten for your response!
↧
Re: HP SMH - Temperature Sensors missing
I see all temperatures in ilo, so i will install newest proliant service pack and then I will try again. thanks for this idea.
↧
Re: ML150G5
I don't recall all the RBSU setting on that system, but look for PCI enable/disable options or under IRQ settings
↧
↧
Re: ProLiant DL380 Gen9 - NIC Teaming
Hello !
I have HP DL360 Gen9. And i install Windows Server 2008 R2. And i needed network team.
But HP NCU for W2k8 R2 not working on HP DL360 Gen9. And what ? And all :-)
I see this post, try install Broadcom Advanced Control Suite 4, but nothing - i do not see filter "Team".
I try run from Control Panel like Administrator - nothing.
4 reboot server - nothing.
And now i find new, fresh and working version Advanced Control Suite 4 - http://www.necacom.net/index.php/broadcom/netlink/9069-broadcom-management-applications-installer-17-0-5-2
I install it and magic, i see filter "Team" and i create team.
Welcome !
↧
Re: H240 Controller
Hello
You have received some great information on your question. The only question that is lacking is according to page 3 of the HP H240 Smart Host Bus Adapter QucikSpecs the HP H240 is compatible with the Microsoft Windows 2012 R2. I recommend looking at the HP ProLiant ML150 Gen9 Server Option Parts, which will give you the part numbers for the drive cages and the cable kit you will need.
The HP H240 12Gb 2-ports Int Smart Host Bus Adapter (726907-B21), the HP ML150 Gen9 4LFF Hot Plug Drive Cage Kit (725872-B21), HP ML150 Gen9 8SFF Hot Plug Drive Cage Kit (725874-B21), and the HP ML150 Gen9 Mini SAS H240 Cable Kit (784606-B21) are all available directly through HP.
Another option is, I am able to connect you to an HP Sever specialist for more options or configurations. Please let me know if you are interested.
↧
Re: Cant find HP ProLiant DL120 G6 ILO
Im also having a problem setting up ILO, my question is if the static ip adress should be same as my static ip set in windows server or should it be different?
lets say im using 192.168.1.6
mask: 255.255.255.0
gateway: 192.168.1.1
so should the ip for ILO be 192.168.1.6 or something different?
and also is that everything that need to be configured for using ILO?
Cause im not able to access ILO via web ...
thanks a lot for help
↧
Re: ml 350p g8 - fan noise troubleshoot
This is a duplicate, please reply in the following topic:
http://h30499.www3.hp.com/t5/ProLiant-Servers-ML-DL-SL/ml-350p-g8-fan-noise-troubleshoot/m-p/6767461
↧
↧
Re: Identify which drives belong to a specific RAID Group
>unfortunately all varying diferent controllers.
I thought that if others knew what they were, they could better help you.
↧
Re: Degraded State | HP ProLiant ML310 Gen3 v2 Server
Pardon the long delay. Update / logs follow.
After updating the iL0 4 firmware the system health indicator reverted to healthy.
localhost:2381 displays health system status.
IML Logs (multiple occurences of memory module 4 log entry and stop code 0x00000002).
-
Critical 30 | Operating System | 5/14/2015 14:52 | 1
Operating System failure (Windows bug check STOP: 0x00000050 (0xFFFFF8800CF5C289 0x0000000000000000 0xFFFFF8800182B4A1 0x0000000000000000))
Critical 46 | Operating System | 16/24/2015 05:49 | 1
Operating System failure (Windows bug check STOP: 0x0000000A (0x00000000496AD1CA 0x000000000000000B 0x0000000000000000 0xFFFFF80001FFF648))
Critical 57 | Operating System 1 6/28/2015 18:26 6/28/2015 18:26 | 1
Operating System failure (Windows bug check STOP: 0x00000019 (0x0000000000000003 0xFFFFF8800BD68170 0x1898E1FA00050CA0 0xFFFFF8800B9E8170))
Critical 62 | Main Memory | 23 | 7/2/2015 07:47 | 1
Uncorrectable Memory Error ((Processor 1 Memory Module 4))
Critical 61 | Unrecoverable System Error | 3 | 7/2/2015 07:47 | 1
An Unrecoverable System Error (NMI) has occurred (System error code 0x00000002 0x00040002)
↧
Re: Can't create USB key from ACU ISO image???
Ok so I tried with an older version of the key utility -- version 1.7. I got the same result. Photo attached.
To fully rule out a corrupted file I re downloaded the ACU .iso directly onto the windows computer I was using. Unsurprisingly it made no difference!
I was using my nephews computer who happened to be visiting. Fortunately he has a cd/DVD writer on his laptop. So I wrote the same .iso image to a cd. Then I used that cd to successfully make a USB key.
The good news is that I got it to work.
I can not fathom how the .iso file can not be used to make a USB key until it is written to a CD. This seems like a major bug to me which needs to be fixed. There are situations which might arise where someone does not have the ability to burn the image to a disc.
Even though it did not help directly thanks for the assistance.
To fully rule out a corrupted file I re downloaded the ACU .iso directly onto the windows computer I was using. Unsurprisingly it made no difference!
I was using my nephews computer who happened to be visiting. Fortunately he has a cd/DVD writer on his laptop. So I wrote the same .iso image to a cd. Then I used that cd to successfully make a USB key.
The good news is that I got it to work.
I can not fathom how the .iso file can not be used to make a USB key until it is written to a CD. This seems like a major bug to me which needs to be fixed. There are situations which might arise where someone does not have the ability to burn the image to a disc.
Even though it did not help directly thanks for the assistance.
↧
Re: HP Proliant ml350 g6 is compatible with Nvidia tesla K40?
Hi,
Tesla GPU may not be compatible with older generation servers. Its suitable for SL series and few ML/DL servers of Gen8 and Gen9.
http://h20195.www2.hp.com/v2/getpdf.aspx/4AA5-5836ENW.pdf?ver=1.0
http://www8.hp.com/h20195/v2/GetPDF.aspx/c04123180.pdf
Thank You!
I am a HP employee
__________________________________________
Was the post useful? Click on the white KUDOS! Thumb below to say Thank You!
↧
↧
Re: HP PROLIANT DL360G9
Hi,
Its called Automatic Power-On option in BIOS.
Use this option to configure the server to automatically power on when AC power is applied to the system. By default, the system returns to its previous power state when AC power is restored after an AC power loss. This option sets the system to always return to the “on” state, even if it was in the “off” state when power was lost.
To set Automatic Power-On:
1. From the System Utilities screen, select System Configuration→BIOS/Platform Configuration (RBSU)→Server Availability→Automatic Power-On and press Enter.
2. Select a setting and press Enter:
• Always Power On—The system automatically returns to a power on state.
• Always Power Off—The system automatically returns to a power off state.
• Restore Last Power State (default)—The system automatically returns to its previous power off state.
3. Press F10 to save your selection.
Thank You!
I am a HP employee
__________________________________________
Was the post useful? Click on the white KUDOS! Thumb below to say Thank You!
↧
Re: iLO light will not turn off
Yes, you're right.
But in this case the light goes on independently although no one is logged in!
The last week, after I turned off the light manually it stays off until friday.
Today I see, the light is turned on again!
↧
Drive options for ML150 GEN9
Hi folks,
I don't understand the different drive options of ML150 GEn9 systems. Is it possible to get some help from here? So what I would like to achieve is a small Hyper-V 2012 R2 system with
-3 SFF SAS disks on P440 (RAID 1 with hotspare, controller has FBWC)
- mirrored 4GB or 6GB SATA drives for daily and/or nearline backups connected to onboard SATA connectors
- DVD-Drive
- internal LTO-2-Drive on SC11xe for long term backups, stored abroad
I would like to reuse the given LTO-2-Drive, which is connected to an Adaptec 29160 in the old server.
Is such a configuration possible? Do I need any special cages ?
Thanks for sharing your knowledge,
Stefano
↧