Hi folks,
I've looked at the quickspecs for DL380p Gen8 and other manuals, but can't find what third party graphics cards are supported. We are interested in getting a video card that we could use with VMware View and enable the sVGA (3D rendering) function. I see that Nvidia Grid K1, K2, Tesla M6, and other AMD firepro cards are supported from VMware compatibility matrix, but can not find if support with DL380p Gen8.
Anyone have a suggestion of where I would find this information?
The drivers are kernel specific and I do not know the status of driver updates being offered beyond RHEL 7.3. The B120i is a chipset AHCI SATA controller that requires a kernel specific proprietary driver for software derived RAID functionality. Many refer to these chipset SATA controllers as 'fake raid'. Since you are doing a fresh installation the HPE recommendation is to use the 'mdadm' software RAID feature included with the OS. For Gen9 and Gen10 with UEFI, HPE offers documentation on how to make both disks bootable and available in the UEFI ESP. You could do something similar for an older BIOS based system to make the 2nd disk bootable in case the primary disk fails.
LSRRB (Linux Software Raid Redundant Boot), refer to the LSRRB users guide available here
https://downloads.linux.hpe.com/SDR/project/lsrrb/
Hey all,
I'm trying to determine if a DL585 G7 can handle 11 single-slot AMD W5000 Firepro cards each with 75w TDP each... Anyone have any idea on this?
Also, when I say handle I mean provide enough for them electrically and provide enough PCI-E lanes that they show up in BIOS :) I realize driver limitations etc are a consideration.
Sheeze HPE! How about offering a deployment wim file or windows 7 iso. Windows 7 professional is still an OS that is used in businesses. I assume one needs to fix the usb drivers but there may be others unique to HPE that could be added.
Otherwise, can the interior USB 2 connection work?
Jimmy Vance wrote:With what you are describing, I doubt the system is actually getting to POST stage where anything can be logged.
That's what I was thinking too. I ordered a new System board and I'll see how it goes once that's in.
Hi,
Recently, my problem was instaling drivers for HP SC11Xe, PCIe bus, SCSI U320 host adapter (LSI 1020/1030 based chip ) under Win XP on Proliant DL380 G5
Backuping some data on HP StorageWorks Ultrium 232 under W2K8 worked perfectly, but specific assessment was, will it work on WIn XP 32bit ? ... because, backup software licence was only for Win XP.
There is a catch 22, when instaling driver use "LSI Logic Ultra 320 SCSI Adapter Non-RAID, v.1.9.11.0, A00" from Dell website
http://www.dell.com/support/home/hr/en/hrbsdt1/Drivers/DriversDetails?driverId=H4RDN
mirror:
http://www.filedropper.com/md2k3a00
> uncheck "show compatible hardware" while seraching for card model and use
"LSI LOgic 1035 Ultra320 SCSI Adapter"
ps.
(successfully tested also on HP DC2300 micro tower and Intel D975XBX2 Bad-Axe 2 mobo)
:-)))
Cherrio to all!
All,
I had bougth my HP Proliant M310e Gen 8 V2 two years ago but due to curcumstancies I was not ablle to try to install the OS.
Now, I have the time but I'm out of warranty and my BIOS is old and not able to update because I'm aout of warranty.
Also F9 (HP Smart Storage manager) does not work, only when I boot from DVD with the latest manager on it I can start..
F10 does not work either,.
When I put the controller in AHCI mode during the install of Windows Server 2016 it does not see the 4 drives that I have in my system.
I also updated later the BIOS to use RAID and stated the Storage Manager from DVD and assign a array, also this array was not shown in the setup of Windows server 2016.
So, i have 3 issues:
1. F9 HP Smart Storage Manager does noet work (embedded, works from DVD)
2. F10 Intelligent Provisiong does not work.
3. Can install Windows Server 2016 (used also the HP Dynamic Smart Array Accelerator Manager and the HP Dynamic Smart Array B120i SATA Raid Controller. (both without success).
4. Can not upgrade BIOS and ILO to the latest release for this server board.
Please, can someone help me further???
Waiting at your feedback.
KR
Johan Valstar
Thanks. I'm forced to use B120i Raid because otherwise server's fans are too loud and I didn't find a way to make them quiet with AHCI mode. I tried to use RHEL 7.4 with new kernel and indeed hpvsa driver causes kernel panick on boot, I guess the only way is to wait for new driver.
I can't find the option in SBW to add "HPE Proliant DL380 Gen9 Support". Could you please tell me how to add this option in SBW?
Hi
I have HP Server ML30 Gen9, I can not access to configration via F10, becouse I maked reset Erase,
How can you help me....?
Regards
Hi
I have HP Server ML30 Gen9, I can not access to configration via F10, becouse I maked reset Erase,
How can you help me....?
Regards
I physically removed additional drives, and set the primary and secondary boot drives to NONE in array config.
Worked perfectly after that.
Hi!
I recently bought 16 x 8gb pc3-8500 for a DL580 that uses four E7-4870
https://www.amazon.com/M392B1K70BM1-CF8-Samsung-1066mhz-Pc3-8500-240pin/dp/B00DUG8SK0
and on boot it says 207 - invalid memory configuration. I installed the dims on 1A and 8A for each memory cartridge. I tried shutting down and waiting for a few minutes but the error is still there.
Any idea why its giving me the error? are the dimm compatible with the server?
I am using the CD provided by MICROSOFT SITE
It then copys files upto 99% which is where I get the following error message - the wim.xml file was not generated correctly. This may have resulted from a failed file copy of install.wim
Hi,
Does anyone know if it is possible to convert an ml350 gen9 rack server to tower? I can see the casing has feet holes on one side, but there appears to only be fittings for 2 feet not 4?....
Anyone have any ideas?
I doubt a bit this is the reason, but you could try to re-install IP:
printerguru wrote:I have a new gen 9 server that the fan are running at abnormal speeds intermittently.the speeds go up for about 10 minutes then backto normal what could be causing this?
Since this thread is about Gen8 server, you would be better off starting a new discussion with your Gen9 server issue. Please provide more information such as the iLO temperature readings and what if any extra cards you have added to the system
Maybe update the title to reflect the correct hardware. You have listed both an ML110 and a DL380 Gen9. Are you using the ISO image, have you burned it to a DVD? are you trying to run it from a USB key? Please provide as much information as possible so others may try to assist