- Implement workaround "enable IPv6" for SUM 8.2
~or~ install SUM 8.1 until fix/resolution.
- Monitor for availability of fix in Sum 8.3.0.
↧
Re: SUM 8.2.0 Connection refused
↧
Trying to confirm EOL for HP ProLiant Servers
I'm not able to look up this information on the HP website either with the Product Number and/or Serial Number. I need to know when the End of Life with HP is for the following servers.
HP ProLiant DL 385 G7
HP ProLiant DL 380 G9
Also there used to be a helpful chat session with HP, however I don't think it is around anymore.
thanks
↧
↧
HPDL380 Gen9 GRUB! error: no such device: HPEZCD240
I have a DL380 and a 24 inches monitor HP Z24n and they were working OK until I replace the video card from Nvidia K620 to Nvidia NVS450. At this point, the DL380 couldn't detect the Z24n monitor. I put again the Nvidia K620 and the problem is still there.
The DL380 has a VGA port which I used to run a test and I saw:
error: no such device: HPEZCD260
I think this post can help me, but the links you posted are not available anymore.
Someone can help me please?
↧
DL360 G5 - Porcessor Unsupported
Hello,
I have changed my cpus in the DL360 G5 today, but now I get the
805-Unsupported Processor.
What can I do to solve this problem?
It seems, that I need the newest bios, where do I get this?
Processor is an L5420, old Processor was an E5335
Hopefully,
YellowPhoenix18
↧
Re: Network problem HPE ProLiant DL380 Gen9
Help me please, tank you
↧
↧
Re: SUM 8.2.0 Connection refused
This is what I got from HPE as well... you can enable ipv6 or downgrade to hpsum 8.1
Be careful if doing this for GEN10 systems as there are a few firmware udpates that require hpsum8.2
iegen10 and spsgen10 firmware for GEN10 requires hpsum8.2 for correct order of installation...
↧
Re: Trying to confirm EOL for HP ProLiant Servers
↧
Base system device driver for ProLiant DL585 G7
Base system device driver for ProLiant DL585 G7
PCI\VEN_103C&DEV_3307&SUBSYS_3309103C&REV_04
PCI\VEN_103C&DEV_3307&SUBSYS_3309103C
PCI\VEN_103C&DEV_3307&CC_088000
PCI\VEN_103C&DEV_3307&CC_0880
Could you please help to identify drivers as server is gettign reboot frequently. As per dump file analysis its ntoskrnl.exe casuing it however have all memory mudules replaced and no error in memory test.
↧
Re: installing windows server 2012 r2 on DL360 Gen9
Same issue here. Updated IP to 2.70 and firmware. I'll keep looking for a solution.
↧
↧
Re: Server login Detail
Those logs should be in /var/log/, including auth.log there.
↧
Re: Intelligent provisioning (An error occurred while installing the system) Land is not defined
My hero!
I have spent 2 days tryn´to fix this MF problem!, if Optimized UEFI is enabled, cant´t update intelligent provisioning (NVRAM Error display on offline update), or use intelligent provisioning if S100i RAID mode is enabled..
Also iLO Reports a mistmaching version of firmwares besides the Intelligent provision reports.
I think Intelligent provisioning is not a "essential" for imaging a server, but is a very nice tool get the job done more easily, and in some way iLO-IP-RSBU interacts each other, so if a problem or inconsistency occurs on one of them, the server start reporting some inconsistency in firmare versions, in some cases i get stuck on firmare updates, nor even cold boot erases the firmrare pending to install.
DL360 Gen10
↧
Re: ProLiant DL380 Gen9 iLO status
Hi
I did not find any OID No. for HP Server like iLO status, memory..etc, i do not know if HP have website search for OID like cisco or not
Thanks
↧
Re: Second RAID card, now where do I put the battery??
Bueller?
↧
↧
Instaling Windows Server 2012 R2 on DL360e Gen8. Cannot Load Drivers
I am having issues trying to install server 2012 r2 on an old dl360e gen8 server. I have my installation on a usb stick and it boots to it. When trying to install it, I dont see any drives. I thought maybe I need to load the drivers so I went to the HP site and downloaded the drivers and tried loading them but it still didnt work.
I couldn't manage to install it via Intelligent Provisioning even when I had the iso on a USB stick.
Any help will be appreciated.
↧
Re: Instaling Windows Server 2012 R2 on DL360e Gen8. Cannot Load Drivers
Whci controller are you working with?
HP Dynamic Smart Array B120i Controller
HP Dynamic Smart Array B320i/512MB FBWC Controller
HP Smart Array P420/1GB FBWC Controller
The B120i only supports SATA, The P420 must have an array created before the OS will see any disks. The B series controllers also need an array, but the RAID function is controlled by a driver so the OS will generally see the drives with or without an array
↧
ML310E gen8 V2 - Four bay LFF drive cage - I see two different models
Good morning, I hope you understand my English, I write from Italy.
I purchased a ML810e Gen8 V2 with 8 SFF drive cage.
I want to buy 4 SFF cage hot-plug drive, I found two different models.
This document http://h20628.www2.hp.com/km-ext/kmcsdirect/emr_na-c03801789-4.pdf
writes: Four-bay LFF drive cage 686745-001 + LFF hot-plug drive backplane 686746-001
This document https://h20195.www2.hpe.com/v2/getpdf.aspx/c04123183.pdf
writes: HP 4U 4 Large Form Factor Hot Plug Hard Drive Backplane Kit 674839-B21
NOTES: The LFF Kit is a backplane kit designed for NHP LFF to hot-plug LFF.
On ebay I also find this: 686745-002 / 822755-001
Suitable for:
HP ProLiant ML310e Gen8 v2
HP ProLiant ML350e Gen8 V2
HPE Gen9 ProLiant ML30 range
visually the two backplanes differ in the shape of the holes and the exit direction of the pin.
are all compatible? can I mount any one?
Thank you
↧
HP ProLiant ML10 v2 Server 4LFF Superior SATA
Hey,
Before buying the server for our office, I need to clear some doubts.
Product - https://zoom.com.kw/product/1/B01NH2WBTL/hp-proliant-ml10-v2-server-4lff-superior-sata
Can I run windows 10 on it? With which os does it comes with
Thanks.
↧
↧
Re: Powershell script to get details of ilo version
Hi,
Is there any question here on fetching the iLO firmware information ?
Thanks,
Gokul
↧
Re: Xenserver HP SNMP Agents for Xenserver 7.1
No, not resolved, still present.
This post can help though.
https://discussions.citrix.com/topic/385265-hp-snmp-agents-on-xenserver-71/
↧
Re: HP ProLiant ML10 v2 Server 4LFF Superior SATA
wrote: Hey,
Before buying the server for our office, I need to clear some doubts.
Product - https://zoom.com.kw/product/1/B01NH2WBTL/hp-proliant-ml10-v2-server-4lff-superior-sata
Can I run windows 10 on it? With which os does it comes with
Thanks.
Windows 10 is not a supported OS
HPE Servers Support & Certification Matrices
Windows Server Certification and Support
http://h17007.www1.hpe.com/us/en/enterprise/servers/supportmatrix/windows.aspx#.WsIUDYjwaF4
↧