Hi there,
I am re-purposing an old HP Proliant ML370 G3 to run BOINC projects to pay back to the scientific community and help keep my computer room warm.
However the 'poor old thing' does not boot and the Internal Health LED is red on boot up.
I've done all the checking I can like reseating the memory, Smart Array card and have checked all the cabling and internal plugs.
All LEDs on the mobo are green and memory LEDs are off so RAM should be fine.
There is only one internal LED that is amber and that is on the SmartArray card and not sure if that has anything to do with it.
All 3 internal fans are running although only one has a green LED and two are not amber just no light at all but running.
Maybe this could be the problem?
Seriously clutching at 'straws' at the moment so please some one help me with this challenge.
I'm sure someone out there knows these old servers and can help me get it going again.
Many thanks, in advance.