Re: Unidentified network status on ProLiant DL380 Gen9
Does the Server have IP Addresses statically assigned to each NIC's port or what?Does the Server receive IP Addressing dynamically via a DHCP Server or what?NIC Software Driver (and Firmware) version...
View ArticleRe: ML350 G9 UEFI Won't boot to 2012R2 CD or USB
I tried to follow the instructions for creating a bootable UEFI USB flash drive in that document and had trouble. The instructions say to copy the windows files to the USB stick. But the stick is...
View ArticleRe: DL380G6 - Position of Temp Sensor 29
I noticed your fans are running between 13 & 50%. What's your ambient temperature
View ArticleRe: DL380G6 - Position of Temp Sensor 29
Also, it has now been over a year and my fan speeds have not moved at all from what I reported upon placing the WD Red drives into the server.
View ArticleRe-purposing an old HP Proliant ML370 G3 to run BOINC projects
Hi there,I am re-purposing an old HP Proliant ML370 G3 to run BOINC projects to pay back to the scientific community and help keep my computer room warm.However the 'poor old thing' does not boot and...
View ArticleML350 G6 boot problem
Greetings!I have an ML350 G6 workstation that want to speed up.I put them in a SSD with PCI-e interface, and they offered to HP Z turbo drive card, but I think it is worth nothing, until you can boot...
View ArticleRe: P2000 SAS Nightmare
look at my nightmare too do you have anything to share /t5/Storage-Area-Networks-SAN-Small/HP-P2000G3-SAS-Crasiest-Bug-EVER/m-p/6913949#M10347
View ArticleWhere to locate the Hard Disk in RBSU
I am new to sever hardware.But I am good at Desktop Hardware.Can some one help me to locate the Hard Disk in RBSU (BIOS)My Server model is Proliant DL360 G6RBSU Version is Version 3.
View ArticleRe: Where to locate the Hard Disk in RBSU
You can't in RBSU, but you can in ORCA.Press F5 during boot when the controller prompt it. Select the disk and it will lid in blue.
View ArticleRe: HPE System Management Homepage 7.6.0
Hello,After more testing it seems to be something related to the OS... All the Windows Server 2012 R2 are getting the proper installation and the icon (old or new) is working fine I am getting the page...
View ArticleRe: ESXi install loop
My fix action was just a patch job. The install occured on the external hard drive that I was using. I set the boot to the USB drive and ESXi booted up just fine.
View ArticleHow to upgrade firmware of NetXen NC375i and Broadcom NC382T in DL580 G7
Hi,My server DL580 G7 running with ESXi 5.5. I need to upgrade firmware of NetXen NC375i and Broadcom NC382T for protect the issue following the information in the weblink...
View ArticleRe: HP ProLiant DL360 G7 Fan Speed Issue
The fans, by default, are going to be reactive to system temps, which will vary depending on the CPU load usually. Are you running anything that might spike CPU activity sometimes, resulting in the...
View Articlegen8 hdd to gen6 server, with swapped caddies, doesnt recognize.
Hello.We have Proliant DL320 G6. Recently got an ilo error:Internal SAS Eclosure device failure (RAID1)We asap bought an hdd, what was designed for Gen8 servers (because this hdd we could get the...
View ArticleUp front and center with HPE at Spiceworld 2016—where everything IT connects.
This will be Hewlett Packard Enterprise’s 1st SpiceWorld appearance since the split from HP in 2015. Other than the excitement of celebrating the company’s birthday, I’ve been looking forward to this...
View ArticleRe: HPE System Management Homepage 7.6.0
When you useing the newest SMH7.6.0 at W2K8 or W2K12,You need to add Use TLS 1.1 and Use TLS 1.2 to you IE's internet options(advanced tab) .I think this will be resolve your problem.
View ArticleWake on LAN for ProLiant DL160 G6
HiI have been trying to get Wake on LAN to work with my ProLiant DL160 G6. I understand from the specifications that this product supports WOL but I do not have ILO on this server. I have enabled the...
View ArticleRe: DL580 Gen9 - Workload Accelerator FIO_EXTERNAL_POWER_OVERRIDE won't take...
I am pretty shure you have found the solution meanwhile, but here it is:If you have mutliple adapters , always put in the parameters for all cards separated with a comma alltogether in one single...
View ArticleRe: ML310e Gen8 V2 with Server 2016 Hyper-V
Funny, I also had this exact problem with the same server.Thank you very much for your efforts, problem succesfully solved by disabling VT-D!Btw, what is the drawback of disabling vt-d?
View Article