Hi
Please find the steps to update System ROM –BIOS and iLO 4 Firmware through iLO web console.
1. Update System ROM –BIOS firmware.
Type: BIOS (Entitlement Required) - System ROM
Version: 2019.05.24(12 Jun 2019)
Installation:
To update System ROM BIOS Firmware through iLO Web UI:
1. Download cp040096.exe (2.3 MB) from below link.
https://support.hpe.com/hpsc/swd/public/detail?swItemId=MTX_1bdec773834044b6825d2ff850#tab1
2. Execute cp040096.exe and select extract option.
3. Once cp040096.exe file extracted, copy cp040096 folder and place in system from where iLO is accessible.
4. Using a Web Browser, proceed to the iLO Web UI using the iLO IP Address.
5. Navigate to Administration Firmware.
6. Choose “Select Update Firmware”.
7. Select Browse at Local Binary File.
8. Select the Firmware file (CPQP7013.6B8) to be flashed.
9. Select the Flash to begin update process and wait for the firmware flash complete message to display.
10. Reboot the system.
2. Update iLO firmware.
Type: Firmware - Lights-Out Management
Version: 2.70(14 May 2019)
Installation:
To update iLO 4 Firmware through iLO Web UI:
1. Download cp038075.exe (13 MB) from below link.
https://support.hpe.com/hpsc/swd/public/detail?swItemId=MTX_f13420b102cb4101ab1befc470#tab1
2. Execute cp038075.exe and select extract option.
3. Once cp038075.exe file extracted, copy cp038075 folder and place in system from where iLO is accessible.
4. Using a Web Browser, proceed to the iLO Web UI using the iLO IP Address.
5. Navigate to Administration Firmware.
6. Choose “Select Update Firmware”.
7. Select Browse at Local Binary File.
8. Select the Firmware file (ilo4_270.bin) to be flashed.
9. Select the Flash to begin update process and wait for the firmware flash complete message to display.
10. Reboot the system.