Quantcast
Channel: All ProLiant Servers (ML,DL,SL) posts
Viewing all articles
Browse latest Browse all 30225

Re: Adding capacity to ML330 G6

$
0
0

Hi,

 

Yes, the controller out memory cache support up to two logical drivers, below Technical Specifications

 

Technical Specifications

Dimensions (not including bracket) Low Profile PCIe Form Factor: 7.5 in x 9.5 in x 2.25 in (19.05 cm x 24.13 cm x 5.72 cm)

Disk Drive and Enclosure Interface Transfer rate: 6Gb/s SAS (Serial Attached SCSI) 3Gb/s SATA (Serial ATA)

 

SAS Connectors: 2 internal (Mini-SAS) x8 wide port connectors

 

Cache Memory Speed: DDR2-800MHz with 40 or 72-bit wide bus provides up to 4.2 GB/s maximum bandwidth.

 

Server Interface: x8 5G PCIe 2.0 provides 4GB/s maximum bandwidth

 

SAS Speed: x8 6Gb/s SAS provides 4.8GB/s maximum bandwidth

 

Cache Memory: 40-bit 256MB ECC protected cache (72-bit 512MB BBWC or 72-bit 512MB and 1G FBWC module upgrades available); transportable with battery-backed or flash upgrade

 

Logical Drives Supported:Zero Memory, Up to 2 logical volumes  -  256MB cache and greater, Up to 64 logical volumes

 

Host Memory Addressing: 64-bit, supporting greater than 4GB server memory space

 

RAID Support:  RAID 6, 6+0 (Advanced Data Guarding)
NOTE: RAID 6, 6+0 can be enabled with either

  • Minimum of 256 MB cache, Battery kit and Smart Array Advanced Pack License key option upgrades
  • Minimum of 512 MB BBWC/FBWC and Smart Array Advanced Pack License key option upgrades
  • RAID 5, 5+0 (Distributed Data Guarding)

NOTE: A minimum or 256 MB cache and battery are required to enable RAID 5, 5+0 support of the Smart Array P410iRAID 1+0 (Striping & Mirroring) RAID 0 (Striping)

 

Upgradeable Firmware:  Upgradeable Firmware with recovery ROM feature

 

For more details, see the quickspecs:

http://h18004.www1.hp.com/products/quickspecs/productbulletin.html#spectype=worldwide&type=html&docid=13201


Viewing all articles
Browse latest Browse all 30225

Trending Articles



<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>