Quantcast
Channel: All ProLiant Servers (ML,DL,SL) posts
Browsing all 30225 articles
Browse latest View live

Re: How to identify drive bay

Not 100% sure about this special controller, but on all other smart arrays you just select the drive in physical view and the blue LED will go on. Port 1i, Box 1, Bay 1 is the most left slot in the...

View Article


B320i Raid 5 Expansion/Extend

Good day to you all, We bought a DL380e Gen8 with smartarray B320i. Only one Raid 5 volume was created with 4x600GB SAS at the initial setup.Now we need to allocate more space to this volume and i was...

View Article


DL180 G6 Rear PCIe Kit

I have a DL180 G6 with option part 507263-001 installed on the rear.. I no longer need the two drives on the rear but instead i want to have (if possible) two PCIe cards to install extra network...

View Article

ML110 G6 Fan Failure

I have an HP ML110 G6 that just reset. The event viewer indicates that Fan 2 had been removed. Checking the history this has been going on for several months. Exact error is: System Information Agent:...

View Article

Dual Booting Server

Hi all, I have a client who wants to upgrade their server from Server 2003 (x86) to Server 2008 R2 (x64).  As an in-place upgrade is not supported, the manager has decided for me to look into a dual...

View Article


1783 smart controller E200i

Hi,  I am getting a "1783 - Slot 0 Drive Array Controller Failure! [Controller Self-test failure]"After reading through a whole bunch of posts. I am wondering now what exactly the solution is.I just...

View Article

HP ML150 G6 Raid 5 expand

Hi, currently we have  HP ML150 G6 with HP Smart Array P410/256MB RAID Controller  configuration : 3 physical drive @500 GB , SAS hot plug Raid 5 , at slot 2 the question is , is it possible to expand...

View Article

Re: 1783 smart controller E200i

The cache module could be bad or even the controller itself.

View Article


Re: Dual Booting Server

I would remove the 2003 disks, insert new disks and create an array on them.Or you may have a look into ORCA and set the boot array (this is possible for most smart arrays with current firmware).

View Article


Re: Drive sizes

   Kindly specify which generation of DL380 you are referring to.   Regards, Vijayasarathy

View Article

Re: API to retrieve iLo 2 logs

   You may consider using HP Systems Insight Manager (SIM) http://h18013.www1.hp.com/products/servers/management/hpsim/index.html or HP Insight Remote Support:...

View Article

Proliant ML 350 G5

Hi,We have an ML 350 G5 and we would like to use it as a storage server only. I am not really clued up with servers and raid configuration but I know PCs in and out.  My question is that what do I need...

View Article

Re: Proliant ML 350 G5

    Large Form Factor 3.5" drives can only be installed in on tower or rack models with LFF chassis models and Small Form Factor 2.5" drives can only be installed on tower or rack models with SFF...

View Article


Re: Proliant ML 350 G5

Hi, Many thanks for your help. I suspect that the drive cage (where the SAS drives are in) is damaged as the server gets started regularly, anyway this is besides the point, so I want to bypass the...

View Article

HP DL360p G8 raid speed

Server: HP DL360p G8Raid: Smart Array P420i/2GB+FBWCHDD: 4x512GB SSD Samsung 840 Pro (RAID0 stripesize 256kb)OS: Windows 2008 R2 64Bit Hi, Problem is that read/write operations are really slow and...

View Article


HP Support Wizard is RUBBISH at helping establish warrenty status

A 750W hot-plug power module (512327-B21) stopped working. It's in a ML330 G6. Fortunately it's one of a pair. The label says it has Serial Number CEXD1017176740. I go to the Support Wizard and enter...

View Article

Re: DL 180 G6 BMC firmware fault after HP Support pack online upgrade

This unfortunately did not work. For the others in the future: The final solution for my case was to change the motherboard (it was - luckily from my point of view - in warranty) and the HP support was...

View Article


Re: HP Integrated management Log viewer 6.0 feedback

I loved that feature as well.  Please bring it back!

View Article

Re: API to retrieve iLo 2 logs

You can use the HP Lights-Out XML Scripting Sample for Windows to get both the iLO Log and the server IML logs. Included in the package is cpqlocfg.exe for windows and the locfg.pl Perl script for...

View Article

Re: HP Support Wizard is RUBBISH at helping establish warranty status

Feedback for the HPSC should be made there:http://www8.hp.com/us/en/contact-hp/contact.html

View Article
Browsing all 30225 articles
Browse latest View live


<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>