Re: DL160 G6. How to enable USB remotely
doesn't appear it is finding the companion .xml file. drop it in the same directory as conrep, there is also a conrep.xml that needs to be in the same directory as conrep
View ArticleRe: ProLiant DL320e Gen8 v2 is noisy
This will be the first thing tomorrow in the office!
View ArticleRestore all Network Connections and Settings
Hi I have HP ProLiant DL180 G6 with WIN2008 R2 Server installed.Which files do I need to restore to recover all Network Connections and Teaming Settings using Backup Exec 2010?Systemstatus was not...
View ArticleRe: New 1Gb Broadcom Multifunction Win64 driver (7.8.6.0) is buggy
Well, I haven't tried the 7.8.50.0 driver yet, but over the weekend I updated one of my dev environment DL360 G7 systems from Server 2012 to Server 2012 R2.I had the working 7.4.14.0 driver on there...
View ArticleRe: Restore all Network Connections and Settings
The NIC team is done by binding the physical adapters to the NIC teaming device (HP Network Configuration Utility in the bindings list).The teamed adapter then stores it's configuration in the registry...
View ArticleRe: Upgrade a on Board Smart Array P410i with a Battery form a P400, to get a...
I don't have them in front of me, but I seem to remember that the last time I replaced batteries on a P400 and a P410, they had different connections where the battery attaches to the controller....
View ArticleRe: Friendly Name on Broadcom NC373i
Some of the network stuff can be found in the following registry subtree:HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\B06BDRV(that would be for Broadcom drivers, which would include most HP...
View ArticleRe: DL380e Gen8 - Can't use all 8 drive bays
Yes, the 8 drive backplane has 2 SAS ports and both need to be connected to a controller. It should have come wired that way with both SAS cables wired to the built-in P420i, but it sounds like you may...
View ArticleRe: Physical Memory
Yeah, like Dennis mentioned, without knowing what OS you have, this is just a guess...It looks like your system has 48GB of physical memory, but maybe you're running Windows Server 2008 R2 *STANDARD*...
View ArticleRe: Advice - ILO4 Virtual Media on DL380p Gen 8
You might check that there aren't any firewall rules in the way. The remote media runs on certain TCP ports. It's a different port than the ilo remote console, but I don't remember what it is off the...
View ArticleRe: Smart Start Download or CD for ML350G6
tricky4a wrote:That link takes you to 8.7 with no way of getting to 8.4. Come on HP get your act together! put CD's and archived versions on an easy to find section. Its not rocket science, just logic!
View ArticleRe: ProLiant DL320e Gen8 v2 is noisy
it WORKS! It has a little noise, but it's acceptable. Thank you very much! Btw, it is really from 2013.11 ? norby
View ArticleCentOS 6.3 and 5 unable to install in HP ProLiant _DL380 G8
Hi, I have a new DL380 Gen5 Server with 2.3TB raid5 array(5 x 600GB HDD) When we are installing CentOS 6.3 or centos 5 on it, in the middle of the installation it shows an error. "Your boot...
View ArticleRe: DL160 G6. How to enable USB remotely
Hi,it worked. The problem was I didn't copied the hpsstkio.sys file to c:\windows\system32\drivers\hpsstkio.sys, so the driver wasn't loaded. Thanks for your help!
View ArticleRe: HP DL 160 G6 memory error
Same here after Upgrading ESXi 5.0 build 474610 to ESXi 5.1 build 1157734 on DL180 G6+hp-esxi5.0uX-bundle-1.5-39.ziphp-HPUtil-esxi5.0-bundle-1.5-31.ziphp-nmi-esxi5.0-bundle-2.1-2.zipCRITICAL: Power...
View ArticleCan not find OS CD media
I'm trying to reinstall OS on Proliant server, but the problem is that only have CD1 of Windows 2003 R2 Standard Edition, and can't find the second CD. Does anybody how could I donwload it from HP? Of...
View ArticleHow to identify drive bay
I have a customer with an ML150 G6, that has a failing hard drive. The customer is quite a distance from me, and has some fairly decent tech skills. I'm certain he can replace a hot swap drive. ACU...
View ArticleHP DL580 G5 and redundant PSUs
Hi, recently our hosting provider scheduled a power maintence to replace one of their UPSs. Our DL580 G5 has 4 redundant power supplies. Two were plugged into the A circuit and two were in the B...
View ArticleRe: How to identify drive bay
It depends if you use an smart array controller or just the embedded controler with hotswp or non-hot-swap disks.If you can use ACU you can turn the location (blue) LED on for hotswap drives by...
View ArticleRe: How to identify drive bay
It's using the embedded B110i controller, and there doesn't seem to be any way to make the light blink in the ACU.
View Article