DL980 G7 stuck on "Flashing Firmware Image, please wait ..."
Hi, I have updated our big server DL980 G7 after fresh deployed Windows 2012 R2 OS and updated firmware using HPSUM in SPP v2012-09 ISO. After reboot, I cannot open Remote Console (POST Code:1040) and...
View ArticleRe: "Create Array" is not visible on Array configuration utility
Hi, "The controller will not allow a new array to be created, either because the controller has no unassigned physical drives attached or because the maximum number of arrays or logical drives has been...
View ArticleRe: iLO Shared Network port - locked out
Hi Suman_1978.Thank you very much for your reply.I have already read the documentation and saw the video but I have two doubts:- I am sorry but we forgot to mention that we are running VMware ESXi on...
View ArticleRe: Hp ProLiant ML150 G6 not booting up
Hi Suman! First of all, thanks for replying to my post and trying to help me! I assume, clearing the nvram is reseting the bios? If so, I've done it before and still does the same. As for the CPU, this...
View ArticleGraphics card not working on ML310
I've installed Widows 8.1 64bit on a ML310 and i'm trying to install a graphics card to work with a higher resolution monitor. However when I install the card and switch on the server I cannot boot to...
View Articleproblam with Hp Proliant ML 150 Please Help Me
Hi Engenieerwe have one proliant ml150 when this server turned on come hp bios screen and UnexpectedLy TURNED OFFTHIS SERVER BOARD NOT UPDATED TO HIGHER BIOS VERSION ITS ORGINALHELP ME THANS
View ArticleRe: DL380 G4 Fan Noise Very Loud
Suman, Do you know of any registry tricks to fake the system into thinking 2003 or 2008 non R2 is installed? The OS seems to function just fine and I was able to find all of the drivers I needed. This...
View ArticleRe: DL380 G4 Fan Noise Very Loud
Do you have the HP health driver installed? Some of the older ProLiants used the health driver to regulate fan speed.. Also check in System ROM that the fans are not set to provide maximum cooling
View ArticleRe: DL380 G4 Fan Noise Very Loud
Jimmy, Yes I do have the health driver installed, but the management page says the fans are running at 30% which is definetly a false reading. As I mentioned in my first post there is no fan speed...
View ArticleRe: DL370 G6 - converting between 2.5" and 3.5" drives
487790-xx1 comes with one 8SFF drive cage standard. You will need to order option part number 507803-B21 to install in 2nd and 3rd drive bay. Yitzhak V.
View ArticleRe: HP NC522SFP+ Dual Port 10GbE Software
Does anyone know if it works with freenas? I know according to them it's not compatible, but has anyone got it to work?
View ArticleUpgrade a on Board Smart Array P410i with a Battery form a P400, to get a...
Hallo,our Proliant DL 380 G7 has a Smart Array P410i 256mb Memory on System Board. To expand the Array (Raid 5) with two more SAS HDs, a Battery (BBWC) is recommended. Can I use the battery form a...
View ArticleRe: RILOE II Remote Console doesn't work with Java 7.
You would have to set up a proxy that intercepts the browser's request to download the JAR file from the RILOE-II card, and then supplies the modified version of the JAR file with the proper attributes...
View ArticleRe: How to read variable cpqDaAccelStatus from ProLiant DL380 G5
This text was from a SNMP trap, so the text refers to a SNMP variable. It is located within.iso.org.dod.internet.private.enterprises.compaq.cpqDriveArray.cpqDaComponent.cpqDaCntrl.cpqDaCntrlTable,so...
View ArticleDL160 G6. How to enable USB remotely
Hi,I accidentally disabled USB in bios following a workaround to fix a problem I had. After that, I discovered ILO uses USB emulation for Keyboard and mouse, so now I have no way to re-enable it again....
View ArticleRe: DL160 G6. How to enable USB remotely
If you can access the host OS remotely you can use the "conrep" utility to reset the SUB settings in the ROM. Download the HP Scripting toolkit for Linux or Windows and unpack the archive....
View ArticleRe: ProLiant DL320e Gen8 v2 is noisy
Hi Norby, Sorry, I confused this platform with the ML310e Gen8 V2. The DL320e team has told me that they have addressed the FAN issue on a new P80 ROM dated 11/08/2013. This ROM will be released with...
View ArticleRe: DL160 G6. How to enable USB remotely
Hi,I saved the current settings, but it seems the romdata.dat file is empty after saving the details. This is the content: <?xml version="1.0" encoding="UTF-8"?><!--generated by conrep version...
View Article