Re: Smart Array E200i - "low battery voltage" even with new battery
Theres is nothing you need to do after the battery swap, but maybe the loader is edfective, so you probably need another cache module.
View ArticleRe: DL385G8 no controllers detected.
With the same server can happen with Intelligent Provisioning, so because the solution is upgrade IP i assume that the new IP has a newer ACU.My advice is Update ACU from the same SPP. If the firmware...
View ArticleRe: Unusual number of FBWC modules failing... anyone else with this experience?
This sounds like one of the problems we had too.I think there is a timeout counter that resets when the server is off. Then it waits some hours for the cap to reach the fully charged voltage. If that...
View ArticleRe: HP ML350 G5 internal & external health leds blinking on front panel
hI PaulI have the exact same problemTried all of the above, haven't replaced the motherboard yet (and I m not going to)What do you mean by PPM?
View ArticleNvidia Quadro K6000 - Drivers for DL380p G8 - Windows Server 2012 R2?
I know this is a long shot, considering I've already gone through HP support, and they haven't really given an answer... My company spec'd out 4 servers, and for the instance in question, (3) of these...
View ArticleRe: ML350p Gen 8 UEFI bios
The first document cited is from 2010. Perhaps HP would like to present their current (2014) position on UEFI in Proliant servers? The DL580 G8 supports UEFI, but not the other G8's, i.e. ML350p and...
View ArticleRe: Getting BIOS, Network, iLO settings via WBEM
Thanks, the document is quite handy! I was able to find some of the items I was looking for in there, though not all of them. At least I have a definitive list now. I also stumbled across the new...
View ArticleHP ProLiant MicroServer Gen8 G2020T 1P 2GB
Hi, I am about to purchase this unit and am looking at hdd's to put in it. Ideally I want mamximum storage and the specs say the max is 12TB (4 x 3TB). I have also been told I can put 16TB in (4 x 4TB)...
View ArticleRe: Intelligent Provisioning wants Autounattend.xml, retaining settings
Based on skimming our old notes, it looks like it worked after we used the ACU to create 2 logicial drives instead of having Intelligent Provisioning partition the drive. Note that Intelligent...
View ArticleRe: ML110 G7 fan at 100% with P420
Hi, I'm in similar situation, but I think to have found the solution. As you wrote they can found a lot of high speed fan troubles and also some solutions. Comparing the solutions the one that should...
View ArticleRe: ML110 G7 fan at 100% with P420
In this Forum, just two thead after this, I found the link for the iL100 firmware. take a look at this similar thread:...
View ArticleRe: ML110 G7 fan at 100% with P420
Thanks desigabri.I have iLO3 in my server and latest firmware did not make any difference.But after running at 100% for more than a day, the fans got quieter. Still loud, but much better.
View ArticleHPQLOCFG utility - bug with -s server name containing "-"
Not sure where else to file a bug report but wanted to try and get it fixed somehow. I'm using the HPQLOCFG (v1.0.0 dated 07/22/2013) utility to script ILO changes across my environment. My ILO DNS...
View ArticleRe: HPSUM 6.20 crashes when run from a mapped drive via the command line
The release notes and readme files tell not to run from a mapped network drive, otherwise hpsum will crash. You must copy the files local to the system you are installing the SPP to
View ArticleRe: HPSUM 6.20 crashes when run from a mapped drive via the command line
Really? I have not seem this statement. I have spoken to HP Support this morning and they have advised me that this is a known issue and are recommending customers do not run the whole SPP using...
View ArticleRe: HPSUM 6.20 crashes when run from a mapped drive via the command line
Wow, I thought I saw that in there, but cannot find it now, or I had it confused with the issue with running from ILO virtual media. And yes, I am having my own issues with the new SPP as well...
View ArticleExpand HD in Proliant DL380 G7
Hello, We have a Proliant DL380 G7 L (product 583917-B21) with all 6 HD connected (SAS MDL 2TB). PCI slots 2&3 full for FC (other PCI free: 1,4,5,6). We want to increase HD without formatting O.S....
View ArticleRe: Expand HD in Proliant DL380 G7
You have several options. - remove the optical drive cage and install another hdd cage. So you can have 2x 8 disks in the server. you will need a sas expander card or another smart array controller for...
View ArticleRe: HPQLOCFG utility - bug with -s server name containing "-"
I'll pass along your findings to the iLO team.
View Article