Re: HPSUM 6.20 crashes when run from a mapped drive via the command line
can you send me the event Log? also you can check :http://www.hp.com/go/hpsum/documentation....
View ArticleApplying Offline Firmware without HP SUM or Firmware DVD ?
Hi, I've got an issue on a DL380 G7, where HP support are requesting that I upgrade the SAS Backplane Firmware from 1.14 to 1.18. Unfortunately the server in question is on a closed network, and remote...
View ArticleRe: Applying Offline Firmware without HP SUM or Firmware DVD ?
you can choose to update you server using ftp repository under HPSUMInstall the last version :http://h17007.www1.hp.com/us/en/enterprise/servers/products/service_pack/hpsum/index.aspx Launch HPSUM when...
View ArticleRe: Applying Offline Firmware without HP SUM or Firmware DVD ?
In theory you just need to boot any kind of live linux, the run the *.scexe file from the prompt. Such linux may have only a few MB.
View ArticleRe: HPQLOCFG utility - bug with -s server name containing "-"
Was told this is fixed in HPQLOCFG v1.1.0 HP Lights-Out Configuration Utility v1.1.0 Feb/2014...
View ArticleRe: HPQLOCFG utility - bug with -s server name containing "-"
CONFIRMED! Yes, this bug is gone in version 1.1.0. It's not mentioned specifically in the release notes but I have confirmed my issue is no longer occuring. Thank you for the lead on this newer...
View ArticleRe: HP Proliant DL380 G5 NIC's not found after firmware update
Bummer, we just bricked 3 DL380 G5's using the SPP dated 2/2014. It doesn't help that they are no longer under warranty. We were proactivily updating the firmware on 20 servers and the onboard NICs are...
View ArticleS.M.A.R.T. pre-fault error
On my proliant G6 I had on 2 HD (in different times) a S.M.A.R.T. pre-fault error. The Saart Array mark my HD and my RAID 5 Logical Drive with a yellow dot.My questio is:The pre-fault is a "prevision"...
View ArticleSmart Storage Administrator and Hyper-V 2012 R2 Core
HelloI am trying to install the Smart Storage Administrator on Hyper-V Server 2012 R2.Previously i installed HP Service Pack for ProLiant 2014.02.0 18 Feb 2014. I have a DL380 G6.Second i started...
View ArticleRe: HP Proliant DL380 G5 NIC's not found after firmware update
Hi we have just the same issue with SPP 2-2014 and 2 of our DL385 G5 ESXi-hosts.After one full automatic update on the first server we bricked our first two onboard NICs (NC373i). After a manual update...
View ArticleProliant DL360 G7 memory upgrade
Hi everybody. I need to upgrade a DL360 G7 server. At this moment the server have 32 GB with 8x4GB modules. The memory is single and the PN is 593339-TV1. My question is...can I upgrade memory with 8GB...
View ArticleHP ML350 Gen8 and Windows 2008R2
Hi, i'm trying to install MS Server 2008 R2 on a new ML350e Gen8. I have selected a Manual Install via Intelligent Provisioning. Bu the installation says that the CD/DVD driver is missing. Has anyone...
View ArticleRe: HP ML350 Gen8 and Windows 2008R2
I think that the issue is that your server can't found Hard Drive,can you tell me wich type of HDD is installed on your server and wich type of controller card is installed also?
View ArticleRe: ML150 G5 possible BIOS bug with add-on pcie video card
As mentioned this hardware is made to be a server only. However you can buy a Video Card based on Nvidea 630 chipset like the one made by Asus and plug it on slot 2 which is a standard x8 connector at...
View ArticleRe: ProLiant DL380P Gen8 - HD Controller Temperature
send me in private message the AHS Log I will work on it and I will give you responses
View ArticleRe: Proliant DL360 G7 memory upgrade
Hi, I need to know the number of processor installed on your server,
View ArticleRe: Smart Storage Administrator and Hyper-V 2012 R2 Core
on which navigator you open the HP Smart Storage Administrator?
View ArticleRe: S.M.A.R.T. pre-fault error
Yes you can consider pre-fault drive a dead drive and you need to replace it ASAP
View Article