Re: Customer Advisory c01587778
Hi there, I just hit upon this with my controller, and I go to the link mentioned and don't see any firmware downloads for the controller. The advistory says to go to this section :Select Firmware -...
View ArticleRe: Customer Advisory c01587778
Oh if I choose Windows Server 2008 I see the right section and different downloads - even though the description also mentions Linux. I'll let you know if that solves my problem. Was not seeing that...
View ArticleMicroserver B120i Array Driver 6.8.0.64 Bluescreens 2008R2 during chkdsk
Configuration: Stock Microserver G8 w/2GB. Three 1TB SATA drives. In RAID 1 or in RAID 0 config (doesn't matter). Win2008R2 with no roles installed. Run chkdsk on any volume and during stage 5 of...
View ArticleRe: Microserver B120i Array Driver 6.8.0.64 Bluescreens 2008R2 during chkdsk
You need to open a support call with HP
View Articlesetting ILO remotely
Is it possible to set the ILO of a DL server in particular Gen8/ILO4 via arp?we don't have DNS
View Articlesetting ILO remotely
Is it possible to set the ILO of a DL server in particular Gen8/ILO4 via arp?we don't have DNS
View ArticleRe: Microserver B120i Array Driver 6.8.0.64 Bluescreens 2008R2 during chkdsk
This solution was found after three, maybe four, chat sessions and one system board replacement over three days (my total time = 20 hrs). Chat sessions take 300% longer than a phone session from the...
View ArticleRe: Array Accelerator Battery has Failed
I advise you to send us a ADU report, with it I can give you the right response about this issue
View ArticleRe: DL380 G5 - CPU board 255 degrees?
I have recently set up a monitoring system and came across the same issue. Has anyone found a solution for this issue yet? Thanks in advance!
View ArticleRe: Firmware Update issue
Hi, Thank you very much for taking the time to offer your thoughts and assistance. I had a look under device manager as suggested, and included hidden devices, the two NC373i cards show up as hidden,...
View ArticleHP DL180G6 and NC523 SFP 10GB Card
Hi, I am using a HP Proliant DL180G6 and want to add a 10GB NIC to the machine.The quickspecs of the NC523 lists the DL180G6 as a supported hardware But when the NC523 NIC is installed the server hangs...
View ArticleRe: ProLiant DL320e Gen8 v2 is noisy
Your Hard Drivers are reporting 49ºC. What HD models are they?
View ArticleProliant ML350 Gen8 LFF non hot swap SSD installation
I am intereted in deploying a new HP Proliant ML350 Gen8 Large Form Factor server with two non hot swap SSD drives for the operating system and HP Enterprise Drives for the file storage. Where is a...
View ArticleRe: ProLiant DL320e Gen8 v2 is noisy
Hi, We are using 2 of these http://disharytech.com/hp-mb0500gcehf-500gb-7200rpm-3-5-sata-6gbps-hdd-w-tray-new.html The situation was unbearable so i shutted down the server for a couple of hours, When...
View ArticleRe: ProLiant DL320e Gen8 v2 is noisy
Can you test something? Shutdown the server, pull the drives and power the server back on? I want to see what is the FAN speed after POST is completed without those drives.
View ArticleRe: ProLiant DL320e Gen8 v2 is noisy
Hi, thanks for the reply, i will do it now and let you know,
View ArticleRe: ProLiant DL320e Gen8 v2 is noisy
Hi, With no disks in the server so far im getting 29%, Is that normal?
View ArticleUpgrade DL380 G6 with memory for max performance
I want to upgrade 2 of our GL380 G6 servers with new memory. Speed is the highest priority so it would seem best to use 3 channels per socket (2 sockets in use) (use all available slots, a total of 18...
View ArticleRe: ProLiant DL320e Gen8 v2 is noisy
With the drives installed and server with POST completed, Can you please go to the Storage tab, select physical view, expand everything and take a screenshot?
View Article