Re: BIOS/Hardware Health critical
Hello,If there are no errors on IML and all other hardware components shows OK on ILO, you can try one of below steps> update server bios to latest if oldType: BIOS (Entitlement Required) - System...
View ArticleRe: HPE ML110 Gen9 Memory Speed
Kindly refer the memory population guidelines and the supported DIMM parts in the following document. https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-c05226549#N10013It is always...
View ArticleRe: DL110 G7 Raid 1 change disks
Hello Urdan,Thank you for your query.Please find our response:-1- Change one disk a try to rebuild the data with the other disk, pressing F1 when the Server is Powering. If I do it, the array is...
View ArticleRe: Move HBA and array to new server
If the H241 fail the new replaced H241 should allow you to import the array configuration from the disks.Just make sure all the drives in the original array are there.
View ArticleRe: Failing to create new array on ML350 G6
Hello Makotat, Please check how much cache memory installed for the P410i controller? If Zero memory, you can create upto 2 logical drive.Please go through the below quick spec for ML350 G6 server -...
View ArticleMDS mitigation bios for older Proliant servers?
Has anyone heard whether or not HPE intends on releasing BIOS updates for the GEN 8 or earlier Proliant ML/DL/SL servers to mitigate the Zombieload/MDS vulnerability?I checked Intel, and they have...
View ArticleDL20 Gen 10 - No controllers detected
Hello,I am trying to get 3 DL20 Gen 10 servers up and running and am tying to get the 2 installed SSD's mirrored through the Smart Storage administrator(hardware RAID 1) and see "No controllers...
View ArticleRe: DL20 Gen 10 - No controllers detected
wrote:Hello,I am trying to get 3 DL20 Gen 10 servers up and running and am tying to get the 2 installed SSD's mirrored through the Smart Storage administrator(hardware RAID 1) and see "No controllers...
View ArticleRe: DL380 Gen10 M.2 enable
, Thanks for the reply. I have been through the entire BIOS. I found no reverence to the S100 at all. Is there an option ROM I need to interrupt during post, prior to BIOS?
View ArticleClik here to view.
Firmware Backplane
Hallo liebe Leute,hab da ein Problem mit der Backplane . Wie kann oder muss ich da die neue Firmware aufspielen?Ich hab für private Zweecken eine Proliant DL380 G7 Server wo ich 2 verschiedene Firmwars...
View ArticleRe: E208i-p
Hmmm. Quickspecs:Slot 1 PCIe2x16Slot 2 PCIe2x8Slot 3 PCIe2x8Slot 4 PCIe2x4According to SSA, these are the negotiated rates:Slot 1 H240 PCIe 2.0 x8 (4000 MB/s)Slot 2 H240 PCIe 1.0 x4 (1000 MB/s)Slot 3...
View ArticleRe: E208i-p
What model server are you working with. From your original post it sounds like your using Gen10 cards in an earlier generation server. The Gen10 cards are specifically designed to work with UEFI ....
View ArticleRe: hp proliant DL370 G6 with windows server 2016 - i need ethernet...
Hi, I did the same install and found that the HP 331T network card is supported for this scenario. Have not found a solution to the base system device yet. Fred
View ArticleRe: Failing to create new array on ML350 G6
Just checked and confirmed that I have zero cache installed on my P410i controller which explains why I am limited to only 2 logical devices. Thanks for your help. Now how do I go about extending my...
View ArticleRe: ML350e G8 V2 - Additional LFF Bay Power Cable?
Hello,You need a seperate power cable for it, below is the Spare part number for the cable kit. 685051-001 Cable kit - Includes 711mm (28 inch) mini-SAS to mini-SAS cable, second processor power cable,...
View ArticleFirmware and drivers for HP Proliant DL380 Gen 7 with Ubuntu Server 18.04.2 LTS.
Good day.Have HP Proliant DL380 Gen 7 with Ubuntu Server 18.04.2 LTS.ILO version – 1.91BIOS version - 2018.05.21SMART Array – 6.64HPE QLogic NC328i/NC532x - 2.18.1Tried to update firmware and drivers I...
View ArticleHPE System Management Tools on HP Proliant DL380 G7 with Ubuntu Server...
Good day.I'd like to install HPE System Management Tools on HP Proliant DL380 G7 with Ubuntu Server 18.04.2 LTS.Before making any changes I updated firmware from SPP 2016.10.0 (it was last SPP where...
View Article10 disk RAID 10 across 2 cages in ML350 G8p ??
I have a server as followsJ2Q95A HP ML350p Gen8p 8x SFF with P420i 512 (factory setup)Later added P420 with 1GB cache along with an 2nd 8x SFF cage I'm planning on ripping out the 300GB drives and...
View Article